Using the radio
Choosing radio mode
Press the  key on the remote control to switch the TV to radio mode. Press the W key to return to TV mode. In radio mode the number and name of the station (if available), its frequency and the sound mode are indicated on the screen.
Selecting programmes
Use the ñ/ôor - P + keys to select the FM stations (from 1 to 40).
Using the radio menus
Use the h key to access the specific radio settings.
Searching radio stations
If you have used the quick installation all the available FM stations will be stored. To start a new search use the Install menu : Auto Store (for a complete search) or Manual Store (for a station by station search).These menus work in exactly the same way as the TV menus.
Screen saver
In the Features menu you can activate / close the screen saver.
Using in PC monitor mode
Note:
When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is operated under electromagnetic interference environment but will not affect the performance of this product. For better performance, good quality VGA cable with good noise isolation filter is recommended.
PC Mode
Your TV can be used as a computer monitor. You must first of all connect the computer and adjust the resolution (see p.11).
Choosing PC mode
Press the U key on the remote control to switch the TV to PC. Press the W key to return to TV mode.
If there is no PC signal for more than five seconds, the TV automatically goes into standby mode.
Using the PC menus
Press the hkey to access the specific settings of the PC monitor mode. Use the cursor to adjust them (the settings are automatically saved) :
•Picture :
-Brightness / Contrast : to adjust the brightness and contrast.
-Horizontal / Vertical : to adjust the horizontal and vertical placing of the image.
-Adjust Colour : to adjust the colours (cold, normal or warm).
•Audio Selection : to choose the sound reproduced on the TV (PC or TV/Radio).
For example, you can listen to the radio while you use the computer.
•Features :
-Phase/Clock : eliminates the horizontal
(Phase) and vertical (Clock) interfering lines.
-View Format: to choose between large screen or the original format of the PC screens.
-Auto Adjust : position is set automatically.
•Reset To Factory Setting : to return to the factory settings (default settings).
•Mode Select : to come back to TV or radio mode.
9
