USING THE CASSETTE DECK
The system has two cassette decks. You can use Deck 1 for normal play- back, consecutive play, and dubbing (recording). You can use Deck 2 for normal playback and consecutive play.
Both decks (1 and 2) have a
LOADING A CASSETTE TAPE
Notes:
•Use the control buttons under the same deck where you loaded the tape.
•Before loading a cassette tape, take up any slack in the tape by turning one of the cassette’s hubs with a pencil. If you do not remove excess slack, the tape might become tangled in the record/playback mechanism.
Follow these steps to load a cassette tape in either Deck 1 or Deck 2.
1.Press TAPE. The TAPE indicator lights.
2.Press STOP/EJECT on either Deck 1 or Deck 2 to open the cassette compartment door.
3.Load the cassette by placing it in the tape guides in the cassette compartment door, with its open edge down, the desired side fac- ing out, and its full reel to the left.
4.Gently close the compartment door.
PLAYING A CASSETTE TAPE
Warning: To protect your hearing, set VOLUME to its lowest setting be- fore you begin playing a cassette tape.
Follow these steps to play a cassette tape in either Deck 1 or Deck 2.
1.Load the cassette.
2.Press PLAY on the deck you are using. The tape plays until it reaches the end of the side, then it automatically stops.
3.Adjust VOLUME to the desired listening level.
24
