Optimus SYSTEM 728 Preparation, Connecting The Speakers, Connecting An External Audio Source

13-1275.fm Page 7 Wednesday, July 14, 1999 3:59 PM

PREPARATION

Note: Complete all connections be- fore connecting to AC power and turning it on.

CONNECTING THE SPEAKERS

1.Press the red speaker terminal tab labeled SPEAKER R. Ch + on the back of the system, insert the stripped end of the right speaker’s striped wire into the terminal, then release the tab.

2.Press the black speaker terminal tab labeled SPEAKER R. Ch - on the back of the system, insert the stripped end of the right speaker’s other wire into the ter- minal, then release the tab.

3.Repeat Steps 1 and 2 to connect the left speaker to SPEAKER L. Ch + and - terminals.

CONNECTING AN EXTERNAL AUDIO SOURCE

To connect an external audio source (such as a CD player or a cassette deck) to your system, connect the source’s left and right line level out- put jacks to the AUX IN R and L jacks on the back of your system.

CONNECTING AN EXTERNAL ANTENNA

You can attach an FM or VHF anten- na (not supplied) to the 300 ohm EXT. ANT. terminals on the back of the sys- tem.

If you have an outside VHF TV an- tenna, you can use a signal splitter with a 300-ohm output to connect your stereo system and TV set to the same antenna. Your local Radio Shack store has a wide selection of antennas, connectors, and splitters.

7