Optimus SYSTEM 728 owner manual Using Consecutive Play, Recording, Dubbing Cassette Tapes

13-1275.fm Page 25 Wednesday, July 14, 1999 3:59 PM

4.To fast-forward or rewind the tape, press STOP/EJECT then press FAST-For REWIND on the deck you are using.

To temporarily stop playback, press PAUSE on the deck you are using. Press PAUSE again to continue playback.

To stop playback, fast-forward, or rewind, press STOP/EJECT on the deck you are using.

5.To open the cassette compart- ment and remove the cassette tape, press STOP/EJECT while the cassette player is stopped.

USING CONSECUTIVE PLAY

You can set the tape player to play one side of a tape in Deck 2, then au- tomatically play one side of a tape in Deck 1.

1.Load the cassette you want to hear first in Deck 2 and the sec- ond cassette in Deck 1.

2.Press PLAY on Deck 2. The cas- sette in Deck 2 plays.

3.While the cassette in Deck 2 is playing, press PAUSE then PLAY on Deck 1.

When the cassette in Deck 2 finishes playing, the cassette in Deck 1 auto- matically begins playback.

RECORDING

Notes:

•Be sure the erase-protection tab for the cassette you want to record on is in place (see “Pre- venting Accidental Erasure”).

•The recording level is preset. Adjusting E-BASS, the graphic equalizer, or VOLUME does not affect the recording level or qual- ity.

Dubbing Cassette Tapes

You can easily copy a tape by play- ing it in Deck 2 and recording it onto another tape in Deck 1. You can se- lect between normal and high-speed dubbing, and you can monitor the tape as you dub it.

1.Load the cassette you want to copy from into Deck 2 and a blank cassette, or one you want to record over, into Deck 1.

25