Optimus SYSTEM 728 owner manual Manually Tuning to a Preset Station, Scanning the Preset Stations

13-1275.fm Page 18 Wednesday, July 14, 1999 3:59 PM

•To store stations into memory locations 6-10, press +5 then a memory location button (1- 5). The station is stored,

MEM- disappears, and the display shows the frequency.

Note: This increases the memory location number by

5.For example, if you press +5, then press memory loca- tion button 2, the radio stores the frequency you selected into memory location 7.

(illus - show the baloon pointing at the +5 button

4.Repeat Steps 1-3 to program stations in the other band.

Manually Tuning to a Preset Station

Press the desired memory location button (1 through 5) to directly select a radio station stored in memory. For preset stations 6 through 10, press +5 then the desired memory location button.

18

Scanning the Preset

Stations

Press M/SCAN. The system scans the preset stations and plays each station for 5 seconds.

Note: Repeatedly press M/SCAN to quickly step through the stored sta- tions.

To stop scanning at a desired station, within 5 seconds after the tuner stops on that station, press DISPLAY or that station’s memory location button.