Optimus SYSTEM 728 owner manual Copying a CD to a Cassette Tape

13-1275.fm Page 26 Wednesday, July 14, 1999 3:59 PM

2.To record at normal speed for the best quality sound, set HIGH SPEED DUBBING to OFF.

To record in half the normal recording time, set HIGH SPEED DUBBING to ON.

3.On Deck 1, press PAUSE then RECORD. PLAY on Deck 1 auto- matically locks down.

Caution: Do not force down RECORD. This can damage the recording mechanism.

4.On Deck 2, press PLAY. PAUSE on Deck 1 releases and the sys- tem copies the tape in Deck 2 onto the tape in Deck 1.

Notes:

•To monitor the tape while it is copying, adjust VOLUME to a comfortable listening level.

•If you monitor the tape while high-speed dubbing, the sound is distorted.

5.To stop copying, press STOP/ EJECT on Deck 1 and Deck 2.

26

When the tape in either deck reaches the end, that deck automatically turns off. If the cassette in the other deck has not run out of tape, that tape continues to record or play. If you were using high-speed dubbing, the continuing tape plays/records at normal speed (instead of high speed).

Copying a CD to a Cassette Tape

Follow these steps to copy the tracks from the loaded CDs to a cassette tape in Deck 1.

1.On Deck 1:

•Load a blank cassette tape, or one you want to record over.

•Press PLAY and let the tape play for about 5 seconds so it plays past the tape leader.

•Press STOP/EJECT to stop the tape.

•Press PAUSE then RECORD.

Caution: Do not force down RECORD. This can damage the recording mechanism.

2.Press CD to select the CD player.

3.Press OPEN/CLOSE to open the CD compartment, then load the desired CDs in the CD player.