Optimus SYSTEM 728 owner manual Using The Sleep Timer, Using The Remote Control

Models: SYSTEM 728

1 36
Download 36 pages 57.84 Kb
Page 15
Image 15
USING THE SLEEP TIMER

13-1275.fm Page 15 Wednesday, July 14, 1999 3:59 PM

USING THE SLEEP TIMER

You can set the system to play up to 90 minutes, then automatically turn off.

1.Press CD, TUNER, TAPE, or AUX to select the desired audio source.

2.Tune to the desired AM or FM radio station, or start the selected CD, tape, or your exter- nal audio source.

3.Press POWER to turn off the sys- tem.

4.To turn on the sleep timer, press

and release SLEEP. SLE and 90 appear on the display.

To set the sleep timer to a sleep time, press and hold down SLEEP until the desired sleep time appears on the display. The displayed sleep time decreases in 10-minute steps.

The system turns itself off after the amount of time you selected. To turn off the sleep timer sooner, press SLEEP again so SLE disappears from the display.

USING THE REMOTE CONTROL

The remote control’s buttons have the same functions as the corre- sponding buttons on the main sys- tem.

To use the remote control, point it to- ward the remote sensor on the left of the system’s AM/FM STEREO RE- CEIVER display and press the de- sired buttons.

Notes:

Make sure you have a clear path between the remote control and the sensor.

Weak batteries or direct sunlight on the remote sensor might reduce the remote control’s operating range.

15

Page 15
Image 15
Optimus SYSTEM 728 owner manual Using The Sleep Timer, Using The Remote Control