Sharp AY-XP12RMR, AY-XP9RMR Timer Operation, To Combine Timer On And Timer Off, To Cancel

TIMER OPERATION

Before setting the timer, make sure the clock is properly set with the current time.

TIMER OFF

1 Press the TIMER OFF button.

•“” will blink on the remote control.

•“ “ will disappear and previous setting time will display on the remote control .

2 Press the or button to set the desired time.

•Every press of or button changes

the time setting by 1 minute. Holding down or button rapidly changes the time setting by 1 minute and then 10 minutes.

3 Press the TIMER OFF button.

•The orange TIMER lamp () will light up.

•“” will be displayed on the remote control.

•“ “ and current time will display on the remote control.

TO CANCEL

Press the TIMER OFF button again.

•The orange TIMER lamp () will turn off.

•“” will disappear on the remote control.

TIMER ON

1 Press the TIMER ON button.

• “” will blink on the remote control.

• “ “ will disappear and previous setting time will display on the remote control.

2 Press the or button to set the desired time.

•Every press of or button changes

the time setting by 1 minute. Holding down or button rapidly changes the time setting by 1 minute and then 10 minutes.

3	Press the TIMER ON button.
	• The orange TIMER lamp (		) will light up.
	• “	” will be displayed on the remote control.
	• “	“ and current time will	display on the

remote control.

TO CANCEL

Press the TIMER ON button again.

•The orange TIMER lamp () will turn off.

•“” will disappear on the remote control.

2

1

3

NOTE:

•If the remote control buttons are not pressed for 5 seconds while the “OFF” or “ON” is blink- ing, the “OFF” or “ON” will disappear and any changes made will not be saved.

•Once you set “TIMER OFF” and/or “TIMER ON”, the timer setting will become daily settings un- less you cancel the timer.

2

1

3

TO COMBINE TIMER ON AND TIMER OFF

The TIMER ON and TIMER OFF can be used in combination.

NOTE:

•You cannot program the TIMER ON and TIMER

OFF to operate the unit at different tempera- tures or other settings.

•Either timer can be programmed to activate prior to the other.

GB-10