Sharp AE-X9RMR, AY-XP12RMR Using The Remote Control, Loading Batteries, Setting The Clock

USING THE REMOTE CONTROL

LOADING BATTERIES

1 Remove the battery cover.

•Press the back side of remote control marked with "", and slide the cover.

2 Insert two batteries. (AAA(R03))

•Make sure the (+) and (-) polarities are correctly aligned.

3 Reinstall the battery cover.

NOTE:

•The battery life is approximately 1 year in normal use.

•When replacing the batteries, always replace both batteries at the same time.

•If the air conditioner is not going to be used for a long period of time, remove the batteries from the remote control.

SETTING THE CLOCK

1 Press the CLOCK Button.

• The CLOCK symbol() will blink.

2 Press or button to set the current time.

•Hold down the button to rapidly change the time setting(by 1 minute and then 10 min- utes).

3 Press the CLOCK Button.

•The CLOCK symbol() will be displayed.

HOW TO USE THE REMOTE CONTROL

Point the remote control towards the receiver window and press the desired button. The unit will make a beep sound when it receives the signal.

•Make sure nothing, such as curtains, blocks the receiver window on the unit.

•The signal effective distance is 7 m.

CAUTION:

•Do not expose the receiver window to direct sunlight. This may adversely affect its operation.

•Use of certain fluorescent lamp in the same room may interfere with transmission of the sig- nal.

•Do not leave the remote control in direct sun- light or near a heater. Protect the remote control from moisture and shock.

Receiver window

7 m

2

1

3

GB-4