Section
01
Operating this unit
SLA (source level adjustment)
SLA (Source level adjustment) lets you adjust the vo- lume level of each source to prevent radical changes in volume when switching between sources.
!Settings are based on the FM volume level, which remains unchanged.
Before adjusting source levels, compare the FM volume level with the level of the source you wish to adjust.
!The AM volume level can also be adjusted with source level adjustments.
1Press M.C. to display the setting mode.
2Turn M.C. to adjust the source volume. Adjustment range: +4 to
3Press M.C. to confirm the selection.
Notes
!When selecting FM as the source, you cannot switch to SLA.
!Operation is complete even if the menu is can- celled before being confirmed.
Initial Settings
1Press SRC/OFF and hold until the unit turns off.
2Press M.C. and hold until CLOCK SET ap- pears in the display.
3Turn M.C. to select the initial setting. After selecting, perform the following proce- dures to set the initial setting.
CLOCK SET (setting the clock)
1Press M.C. to display the setting mode.
2Press M.C. to select the segment of the clock dis- play you wish to set.
As you select segments of the clock display, the selected segment flashes.
3Turn M.C. to adjust the clock.
AUX (auxiliary input)
Activate this setting when using auxiliary device con- nected to this unit.
1Press M.C. to turn AUX on or off.
USB (plug and play)
This setting allows you to switch your source to USB automatically.
1Press M.C. to turn the plug and play on or off. ON – When USB storage device is connected, the source is automatically switched to USB. If you disconnect your USB storage device, this unit’s source is turned off.
OFF – When USB storage device is connected, the source is not switched to USB automatically. Please change the source to USB manually.
Note
Operation is complete even if the menu is can- celled before being confirmed.
Using the AUX source
1Insert the stereo mini plug into the AUX input jack.
2Press SRC/OFF to select AUX as the source.
Note
AUX cannot be selected unless the auxiliary set- ting is turned on. For more details, refer to AUX (auxiliary input) on this page.
Turning the clock display on or off
%Press CLOCK to turn the clock display on or off.
Note
The clock display disappears temporarily when you perform other operations, but the clock dis- play appears again after 25 seconds.
10
En
