| Section |
Installation | 03 |
|
|
Important
!Check all connections and systems before final installation.
!Do not use unauthorized parts as this may cause malfunctions.
!Consult your dealer if installation requires dril- ling of holes or other modifications to the vehi- cle.
!Do not install this unit where :
—it may interfere with operation of the vehi- cle.
—it may cause injury to a passenger as a re- sult of a sudden stop.
!The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet.
!Optimum performance is obtained when the unit is installed at an angle of less than 60°.
2 Secure the mounting sleeve by using a | English |
| |
screwdriver to bend the metal tabs (90°) |
|
into place. |
|
Dashboard |
|
Mounting sleeve
3 Install the unit as illustrated.
Use commercially available parts when instal- ling.
Nut
60°
DIN front/rear mount
Screw
Firewall or metal support
Metal strap
This unit can be properly installed either from “Front” (conventional DIN
DIN Front-mount
1Insert the mounting sleeve into the dashboard.
For installation in shallow spaces, use the sup- plied mounting sleeve. If there is enough space, use the mounting sleeve that came with the vehicle.
Screw (M4 8)
#Make sure that the unit is installed securely in place. An unstable installation may cause skip- ping or other malfunctions.
DIN Rear-mount
1Determine the appropriate position where the holes on the bracket and the side of the unit match.
En 
13
