Pioneer DEH-22UB owner manual Audio Adjustments, Operating this unit, Function settings, English

Operating this unit

Pausing playback	Audio Adjustments
1 Press 2/PAUSE to pause or resume.	1 Press M.C. to display the main menu.
Enhancing compressed audio and restoring rich
sound (sound retriever)	2		Turn M.C. to change the menu option
1 Press 1/S.Rtrv to cycle between:	and press to select AUDIO.
OFF (off)—MODE 1—MODE 2
MODE 1 is effective for low compression rates,	3		Turn M.C. to select the audio function.
and MODE 2 is effective for high compression	After selecting, perform the following proce-
rates.
	dures to set the audio function.
Function settings		FAD/BAL (fader/balance adjustment)
		You can change the fader/balance setting.
1 Press M.C. to display the main menu.	1		Press M.C. to display the setting mode.
	2		Press M.C. to cycle between fader and balance.
2 Turn M.C. to change the menu option	3		Turn M.C. to adjust speaker balance.
and press to select FUNCTION.			Adjustment range (front/rear): F15 to R15
			Adjustment range (left/right): L15 to R15
3 Turn M.C. to select the function.			FR 0 is the proper setting when only two speakers
After selecting, perform the following proce-			are used.
dures to set the function.		EQUALIZER (equalizer recall)
		There are six stored settings DYNAMIC (dynamic),
REPEAT (repeat play)
		VOCAL (vocal), NATURAL (natural), CUSTOM (cus-
1 Press M.C. to display the setting mode.		tom), FLAT (flat) and POWERFUL (powerful).
	!		When FLAT is selected no adjustments are made
2 Turn M.C. to select a repeat play range.
			to the sound.
For details, refer to Selecting a repeat play range on
	1		Press M.C. to display the setting mode.
the previous page.
	2		Turn M.C. to select the equalizer.
3 Press M.C. to confirm the selection.
			DYNAMIC—VOCAL—NATURAL—CUSTOM—
RANDOM (random play)			FLAT—POWERFUL
1 Press M.C. to turn random play on or off.	3		Press M.C. to confirm the selection.
		TONE CTRL (equalizer adjustment)
PAUSE (pause)
		You can adjust the bass/mid/treble level.
1 Press M.C. to pause or resume.	!		Adjusted equalizer curve settings are stored in
			CUSTOM.
S.RTRV (sound retriever)	1		Press M.C. to display the setting mode.
Automatically enhances compressed audio and re-	2		Press M.C. to select BASS (bass)/MID (mid)/TRE-
			BLE (treble).
stores rich sound.
	3		Turn M.C. to adjust the level.
1 Press M.C. to display the setting mode.
			Adjustment range: +6 to -6
2 Turn M.C. to select the desired setting.
For details, refer to Enhancing compressed audio		LOUDNESS (loudness)
and restoring rich sound (sound retriever) on this		Loudness compensates for deficiencies in the low-
page.
		and high-frequency ranges at low volume.
3 Press M.C. to confirm the selection.
	1		Press M.C. to display the setting mode.
	2		Turn M.C. to select the desired setting.
Note			OFF (off)—LOW(low)—HIGH (high)
	3		Press M.C. to confirm the selection.

Operation is complete even if the menu is can- celled before being confirmed.

Section

01

English

En 9