JVC HR-J635EA Code Timer Programming, Access G-CODE Screen, Enter G-CODE Number, Check Input Data

22ENTIMERRECORDING(cont.)

G-Code Timer Programming

Before performing G-Code timer recording, be sure to read "G-Code Setup" (☞ pg. 20).

6

q

	COLOUR
	SYSTEM
					.
					PROG
	1	DAILY	2	3	WEEKLY
NUMBER	4		5	6
ADD	7		8	9

CANCEL	0	TIMER
SP/LP/EP

OK

To Delay The Stop Time . . .

. . . press ADD after pressing OK in step 3. Each time you press, the Stop time is delayed by 5 minutes (meaning that 5 minutes of recording time is added). You can easily compensate for anticipated programme schedule delays this way.

To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday).

Before performing the following steps:

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

●Select the appropriate colour system by pressing the COLOUR SYSTEM button. (☞ pg. 32)

ACCESS G-CODE SCREEN

1	Press PROG.
				G – CODE
		[0–9] =
		[PROG./CLOCK] :MENU
2	ENTER G-CODE NUMBER
	Press the appropriate
	NUMBER keys to enter the			G – CODE
	G-Code number.
		1 2 3 4 5 6 7 8
	● If you made a mistake,
	press CANCEL and enter
	the correct G-Code	[0–9] =
	number.
	CHECK INPUT DATA
	Press OK on the remote
	control. The G-Code	G–CODE			– P 1 –
3 Programming screen					12345678
			START		STOP
	appears.	21:00			= 22:00
			WEEKLY		SP
	● If the G-Code number
			DATE		TV PROG.
	you entered is incorrect,
		25. 12			29
	"ERROR" will be		:OK
	displayed on the screen.
	Press CANCEL and enter
	the correct G-Code number.
	SET TAPE SPEED
4 Press SP/LP/EP.
	RETURN TO NORMAL
5	SCREEN
	Press OK.
	● Repeat steps 1–5for each additional programmes.
	ENGAGE TIMER MODE
6 Press TIMER.