JVC HR-J635EA specifications Code Setup, Access Channel SET Mode Select Screen

20EN

TIMERRECORDING

G-Code Setup

CH SET	TV PROG.
	6
	q

The G-Code timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the G-Code number for the TV program you wish to record (found in most TV listings) and the recorder’s timer is automatically programmed.

Depending on the TV or cable stations that you receive and the channel numbers that they are received on in your area, you may have to make certain changes in your recorder’s “Guide Prog. Set” menu to get proper results. Please read the following information carefully to find out which tasks you need to perform.

Before G-Code setup you must have performed the following procedures:

●Tuner setting (☞ pg. 6)

●Clock setting (☞ pg. 9)

OK

1 2 3

4 5 6

7 8 9

0

TV PROG.

OK

NOTES:

●You can also use the TV PROG. 5/° button on the remote control instead of the TV PROG. dial.

●You can also use the SHUTTLE ring on the recorder instead of the OK button.

Channel Number Matching

Most TV listings have a chart indicating the “Guide Prog.” number assigned to each station for purposes of G-Code programming. Check the chart in your TV listings and see if the Guide Prog. numbers listed for the stations you receive are the same as the channel number on which each is received by your recorder .

If the numbers match, go directly to “G-Code Timer Program- ming” (☞ pg. 22).

If the numbers are different, and you want to be able to timer record programs from those stations, you have to inform the recorder of the mismatch. Go to step 1. If you will not want to timer record from those stations, you can go directly to “G- Code Timer Programming” (☞ pg. 22).

ACCESS CHANNEL SET

MODE SELECT SCREEN

1		Press and hold CH SET for
	more than 2 seconds. The		SEARCH/STORE
	Channel Set Mode Select		DELETE
	screen appears.		FINE TUNING
			GUIDE PROG. SET
			[TV PROG5°] =
			[CANCEL] :EXIT
2		SELECT MODE
		Turn the TV PROG. dial to
	place the cursor next to
	“GUIDE PROG. SET”, then		GUIDE PROG.	TV PROG.
	press OK. The Guide Prog.		1	1
	Set screen appears.
			[TV PROG5°]
			:GUIDE PROG. SET
			[CH SET] :EXIT