JVC HR-J635EA Edit From a Camcorder, SET RECORDER’S Input, Mode, Start Camcorder, Start Recorder

Edit From A Camcorder

1 2 3

4 5 6

7 8 9

0

EN27

You can use a camcorder as the source player and your video recorder as the recorder.

1	MAKE CONNECTIONS
	Connect the camcorder’s AUDIO/VIDEO OUT
	connectors to the recorder’s front panel AUDIO IN and
	VIDEO IN connectors.
	● Use the L connector for monaural connection.
	● When a Master Edit Control-equipped JVC camcorder
	is used, the camcorder is capable of controlling the
	recorder. Refer to the camcorder’s instruction manual
	for operating procedure.
	SET RECORDER’S INPUT
2	MODE
	Press NUMBER key “0”. “F-AU” appears in place of a
	channel number.
3	START CAMCORDER
	Engage its Play mode.
4	START RECORDER
	Engage its Record mode.

NOTE:

Connections made to the front panel AUDIO/VIDEO input connectors automatically override those made to the rear panel AUDIO/VIDEO input connectors.

Recorder	Your recorder
	6
	q

IMPORTANT:

●To edit, both the player and the recorder must be of the same colour system. Press your recorder's COLOUR SYSTEM button to select the appropriate colour system.

●PAL, SECAM and NTSC camcorders can be used as a player for editing.

●For more information on multi-system compatibility, ☞ pg. 32.

VIDEO	AUDIO
IN	IN

Audio/Video Cable (provided)

VIDEO OUT

To the rear panel PAUSE connector

Editing Cable (not provided)

Camcorder

AUDIO OUT

EDIT

Player