JVC HR-J635EA - page 13

EN 13

Instant ReView

Simply by pressing a single button, the recorder power comes

on, rewinds, and begins playback of the last timer-recorded

programme. If you have several programmes recorded, you can

easily access any of them.

NOTES:

●

Before starting, make sure that the recorder is off and that the

Timer mode is disengaged.

●

Turn on the TV and select the VIDEO channel (or AV mode).

ACTIVATE INSTANT

REVIEW

Press REVIEW. The recorder power comes on and the

recorder searches for the index code indicating the start

of the last timer-recorded programme. Once it’s found,

playback begins automatically.

To watch the first of the 3 programmes, press REVIEW

three times. The recorder searches and begins playback

automatically. You can access a programme as far as 9

index codes away from the current tape position.

NOTE:

Instant ReView is not possible while the recorder is in the Timer

mode.

Index Search

Your recorder automatically marks

index codes at the beginning of

each recording. This function gives

you quick access to any one of 9

index codes in either direction.

NOTE:

Before starting, make sure the

recorder is in the Stop mode.

£2

AB C D E F

–2 –1 1 2 3

Current position

Index number

This function helps you check contents of unlabeled recorded

tapes at the touch of a single button.

NOTE:

Scene Finder cannot be used when the recorder is in the Record

mode.

FF REW FF REW FF REW

Search Search Search

Scene Finder

10 minutes

on counter

5 seconds10 minutes

on counter

5 seconds 5 seconds

ACTIVATE SCENE FINDER

Press SCENE FINDER. The recorder starts forward high-

speed search for 5 seconds and then fast-forwards 10

minutes on the counter. This cycle is repeated until the

end of the tape is reached.

●To start Scene Finder in the reverse direction, press

SCENE FINDER and then press the REW button

within 2 seconds. This cycle is repeated until the

beginning of the tape.

●During Scene Finder, "PLAY" appears blinking on the

display panel. During fast forward or rewind, " "

or " " appears on screen.

STOP SCENE FINDER

Press STOP.

NOTES:

●

During Scene Finder high-speed search, you can also hear the

tape sound. During fast forward or rewind, you hear the

current TV sound instead.

●

Scene Finder does not function during Index Search.

Next Function Memory

You can set your recorder's power to go off automatically after

the tape is fully rewound. Before starting, make sure the

recorder is in the Stop mode.

For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press OPERATE within 2 seconds.

NOTE:

If you want the power to be turned off automatically when the

counter reads “0:00:00” (instead of at the beginning of the

tape), press C.MEMORY so that the “M” mark appears before

pressing REW.

Tape Position Indicator

The tape position indicator

appears on screen when, from the

Stop mode, you press FF, REW or

perform an Index Search. The

position of “5” in relation to “0”

(beginning) or “+” (end) shows you

where you are on the tape.

”O.S.D.” (Z pg. 5) must be set to

“ON”, or the indicator will not

appear.

NOTE:

Depending on the type of tape used, there may be times when

the indication is not correct.

0+++

1:23:45

ﬁ

ACTIVATE INDEX SEARCH

Press PUSH JOG or (™ or £). “™ 1” or

“£ 1” is displayed on screen and search begins in

the corresponding direction.

●To access index codes 2 through 9, press PUSH JOG

or repeatedly until the correct index number is

displayed.

Ex.: To locate the beginning of B from the current

position, press PUSH JOG twice.

To locate the beginning of D from the current

position, press PUSH JOG once.

●When the specified index code is located, playback

begins automatically.

ﬁ