Chapter 16 – Advanced (Network) problem solving

Go to www.philips.com/streamium for the latest information on problem solving.

Movies will not play:

The bit rate might be too high. Convert the movie to a lower bit rate.

Check your broadband Internet speed

At www.2wire.com/meter/bm.html you can check your broadband Internet speed. This should be more than 240 kbps for the Streamium LCD TV’s Internet function to work.

Check with your Internet Service Provider:

Whether you may connect more than one device (computers and the Streamium system) to the internet connection.

Whether your ISP allows only devices with registered MAC ad dresses to connect to the Internet.

Whether or not you need to set-up proxy servers for HTTP and/or RTSP.

Check whether you have activated the same wireless encryption key throughout your wireless network:

If you have forgotten your Encryption key, switch off encryption or set a new encryption key for your entire wireless network and for the Streamium LCD TV.

If you are using a firewall, check whether you have opened the ports

42951 TCP and 42591 UDP:

Some ports need to be opened, check at www.philips.com/streamium for the latest information on which ports need to be open.

Check your network’s IP configuration:

Check the Options menu of the Streamium LCDTV. In the Network > Network Info menu a gateway address should be present.This should be the IP address of the PC or network device that connects to the Internet.You can check the network gateway address through your network adapter program or with IPCONFIG (see below).

Note: Philips Wireless USB/Notebook Adapter users may click the ‘Link information’ tab in the CPWUA/CPWNA Monitor program.

Check your computer’s IP configuration as follows:

For Windows 98SE / Windows Me

1Click ‘Start’,‘Run...’, and enter ‘winipcfg’.

2Click ‘OK’ to view the IP settings.

3In this window, select your wireless network adapter.

4Click ‘More Info>>’ to expand.

For Windows XP / Windows 2000

1 Click ‘Start’,‘Run...’, and enter ‘command’.

2 In the DOS box, type ‘ipconfig /all’ and press Enter.

3For each network adapter, you will see results similar to the window on the left.

If your network uses static IP addressing that you have set manually, then you will also need to choose a unique IP address for the Streamium LCD TV in the same range as the network’s IP addresses (e.g. 192.168.2.xxx). Use the same subnet mask as your network (e.g. 255.255.255.000), and write down the IP address of the network device that connects you to the Internet (the Gateway IP address).

Sometimes your Internet Service Provider requires you to use a proxy address. Check this with your Internet Service Provider. Alternatively,check the proxy settings of your Internet browser software for more information.

41

23iF9946_12_StDFU_ENG.p65

41

8/31/04, 4:30 PM

Page 42
Image 42
Philips 23iF9946 user manual Advanced Network problem solving, Movies will not play, For Windows XP / Windows