3HOW TO INSTALL AND CHANGE BATTERY; Fig. 5
1.Remove the FAUCET COVER (1) by unthreading the LEVER SCREW (2) and pulling off the LEVER HANDLE (3). Unthread the FAUCET COVER SCREW
(4) at the back of the FAUCET. Pull FAUCET COVER
(1) up and off. See Fig. 2 in this section.
2.Remove BATTERY HOLDER (1) from FAUCET BODY (2).
3.Remove old battery from the BATTERY HOLDER (1).
4.Install NEW BATTERY (3) into the BATTERY HOLDER (1). Replace BATTERY HOLDER (1) into the FAUCET BODY (2).
5.Replace FAUCET COVER (1) and LEVER HANDLE
(3). Install LEVER HANDLE SCREW (2), FAUCET COVER SCREW (4) and tighten. See Fig. 2 in this section.
4 | HOW TO REPLACE SENSOR; |
| |
Fig. 6, 7, & 8. |
1.Remove the FAUCET COVER (1) by unthreading the LEVER SCREW (2) and pulling off the LEVER HANDLE (3). Unthread the FAUCET COVER SCREW
(4) at the back of the FAUCET. Pull FAUCET COVER
(1) up and off. See Fig. 2 in this section.
2.Disconnect both WIRE CONNECTIONS. Fig. 6.
3.Untighten SENSOR SCREW (1) with a 2.5mm HEX WRENCH. Remove SENSOR ASSEMBLY (2) from FAUCET BODY (3). Remove SENSOR (2a) from CARRIER (4) and replace with new SENSOR (2a). Install SENSOR ASSEMBLY (2) into FAUCET BODY
(3). Tighten SENSOR SCREW (1). Fig. 7, 8.
4.Replace FAUCET COVER (1) and LEVER HANDLE (3). Install LEVER HANDLE SCREW (2), FAUCET COVER SCREW (4) and tighten. See Fig. 2 in this section.
Fig. 8
4
2a
Fig. 5
1
3
Fig. 6
DISCONNECT
WIRE CONNECTIONS
Fig. 7
2.5mm HEX WRENCH
1
2
2
3
5 | M965255 REV. 1.6 |
|