5HOW TO CLEAN FILTER SCREEN ON SOLENOID VALVE; Fig. 9 & 10
1.Remove the FAUCET COVER (1) by unthreading the LEVER SCREW (2) and pulling off the LEVER HANDLE (3). Unthread the FAUCET COVER SCREW
(4) at the back of the FAUCET. Pull FAUCET COVER
(1) up and off. See Fig. 2 in this section.
2.Disconnect WIRE CONNECTION (1) to SOLENOID VALVE (2). Fig. 9.
3.Unthread SOLENOID VALVE (2) from VALVE BODY
(3). Fig. 9.
4.Remove FILTER SCREEN (4) from base of SOLENOID VALVE (2). Rinse clean and replace. Fig. 10.
5.Thread SOLENOID VALVE (2) into VALVE BODY (3) and hand tighten. Reconnect WIRE CONNECTION (1).
Fig. 9.
6.Replace FAUCET COVER (1) and LEVER HANDLE
(3). Install LEVER HANDLE SCREW (2), FAUCET COVER SCREW (4) and tighten. See Fig. 2 in this section.
Fig. 9
DISCONNECT
WIRE CONNECTION
1
2
3
Fig. 10
4 2
6HOW TO REPLACE DIVERTER CARTRIDGE; Fig. 11 & 12
1.Remove the FAUCET COVER (1) by unthreading the LEVER SCREW (2) and pulling off the LEVER HANDLE (3). Unthread the FAUCET COVER SCREW
(4) at the back of the FAUCET. Pull FAUCET COVER
(1) up and off. See Fig. 2 in this section.
2.Pull out LIMITER STOP (1) from the VALVE STEM
(2). Unthread COLLAR NUT (3) from VALVE BODY (4).
Fig. 11.
3.Pull DIVERTER CARTRIDGE (5) out and replace with new DIVERTER CARTRIDGE (5).
NOTE: Make sure the two ALIGMENT PINS (6) in the base of the DIVERTER CARTRIDGE (5) are facing upward.
4.Replace FAUCET COVER (1) and LEVER HANDLE
(3). Install LEVER HANDLE SCREW (2), FAUCET COVER SCREW (4) and tighten. See Fig. 2 in this section.
Fig. 11
2
3 9
1
8
4
Fig. 12
6
5
6 | M965255 REV. 1.6 |
|