AT&T TR1909W, TR1909B user manual Language, Tone/pulse

Page 21

Telephone settings

Menu setup

Language

This telephone comes factory set for English displays. If you wish to change the displayed language to Spanish or French, follow the steps below:

1.Press OPTION/SELECT repeatedly until the screen displays SET LANGUAGE.

2.Press or to select the desired language (ENGLISH, FRANCAIS or ESPANOL).

3.Press OPTION/SELECT. The screen displays

CONFIRM?

SET LANGUAGE

ENGLISH

4.Press OPTION/SELECT to confirm your setting and move to the next feature.

- OR -	CONFIRM?
- OR -
Press CLEAR to exit without saving your
selection and return to idle mode.

Tone/pulse

This telephone comes factory set for touch-tone dialing. If you only have pulse dial (rotary) service, you need to change this setting to

PULSE.

1.Press OPTION/SELECT repeatedly until the screen displays SET TONE/PULSE.

2.Press or to select TONE or PULSE.

3.Press OPTION/SELECT to save your selection and return to idle mode.

- OR -

Press CLEAR to exit without saving your selection and return to idle mode.

SET TONE/PULSE

TONE

NOTE: If you have pulse dial (rotary) service, you can temporarily switch to touch-tone dialing during a call by pressing TONE (see page 19). After hanging up or pressing FLASH, the telephone automatically returns to its original dial mode.

17

Image 21

Contents User’s manual Congratulations Parts checklist TR1909 Table of contentsProduct overview USE light Handset layoutSwitch hook Listening volumeM1, M2, M3 Dialing keysScreen icons Screen display messagesScreen display messages ProInstallation preparation Battery installation Battery installation Telephone installation Wall installation Place the handset back on the telephone base Switching from wall installation to desktop About the feature menu Feature summary Contrast Menu setupHome area code For calls within your area codeLocal area codes For calls outside your area codePress OPTION/SELECT until you see Local Area CODE? Time and date Tone/pulse LanguageAdjust listening volume Adjust ringer volumeBasic telephone operation Make and answer a callFlash Options while on callsMute Temporary tone dialingTo store a number in a one-touch memory location Memory operation one-touchTo review a number in a one-touch memory location To dial a number in a one-touch memory locationDirectory card To store a number in a speed dial memory location Memory operation speed dialTo review a number in a speed dial memory location To dial a number in a speed dial memory locationCaller ID overview About caller IDHow caller ID works Charlie Johnson How call log worksReviewing the call log Caller ID special messagesTo review the call log To dial the displayed number Deleting call log entriesTo delete a call log entry To delete an entryTo delete all call log entries Copying a call log entry into memoryThere is no dial tone TroubleshootingTelephone does not ring Difficulty storing numbers in memoryUSE light does not go on My caller ID features are not working properlyUSE light is flashing slowly Screen is blankTroubleshooting General product care Technical specificationsImportant safety information Product identifier and REN information FCC and Acta informationConnection and use with the nationwide telephone network Repair instructionsProgramming/testing of emergency numbers Rights of the telephone service providerFCC Part Hearing aid compatibilityWhat does this limited warranty cover? Limited warrantyHow do you get warranty service? How long is the limited warranty period?Other limitations Index