AT&T 993 2-Line user manual 800 222-3111.In Canada, dial 1 866

Page 18

Getting started

Wall mounting

If there are two separate one-line wall jacks, use both telephone line cords. Plug one end of the clear telephone line cord into the jack labeled L1 or L1/L2 on the back of the telephone. Plug one end of the black telephone line cord into the jack labeled L2 on the back of the telephone. Route the cords through the channel, bundle the cords, and store them inside the bracket. For line 2, you will need to lift up the bracket and put the cord through the hole in the bracket. Route the cord through the channel so it comes out at the bottom of the phone and return the bracket to the wall mount position. Make sure the bracket clicks securely into place. Plug the free end of the telephone

line cord for Line 1 into the Line 1 modular wall jack. Plug the free end of the telephone line cord for Line 2 into the Line 2 modular wall jack. Make sure the telephone line cords snap firmly into place at both ends. Place the telephone on the wall mounting plate and pull it down until it is held securely.

 

Modular

 

wall jack

 

for Line 1

 

L1

 

Modular

 

wall jack

 

for Line 2

6. Check for a dial tone.

L2

 

Press LINE 1 then lift the handset, or press SPEAKER and listen for a dial tone. Then press LINE 2 and listen for a dial tone. If there is no dial tone, see Troubleshooting on page 58.

7.Confirm Lines 1 and 2.

Press LINE 1 and dial one of the telephone numbers. If there is a busy signal, line 1 is the number you called. If line 2 rings, line 2 is the number you called.

NOTES:

. Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com, or call

1 (800) 222-3111.In Canada, dial 1 (866) 288-4268.

2.Be sure to use an electrical outlet not controlled by a wall switch.

3.The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or under-the-table/cabinet outlet.

15

Image 18
Contents User’s manual Congratulations On purchasing your new AT&T productStop Table of contents Caller ID Appendix Call historyProduct overview Auto Redial Press to activate the auto-redial Quick reference guideCall History Press to display caller ID information Dial pad keysPause Parts checklist Glossary Telephone location Avoid placing the telephone too close toOptional spare battery Telephone installation Check for a dial tone Connect the power adapterConnect the handset to the telephone Confirm Lines 1Data port 800 222-3111.In Canada, dial 1 866Rotate the mounting bracket Connect the power cord to the telephoneWall mounting Reverse the handset tabTwo-line modular wall jack 800 222-3111.In Canada, dial 1 866 Optional headset To exit Feature SETUP, press and hold Enter Menu operationMenu structure Feature setup Turn auto speaker on or offSet the primary line Turn automatic line selection on or off Set preferred mode Set the time and date Turn screen backlight on or off Set the scroll rateTurn the central office voicemail Covm indicator on or off Turn NEW Call light off Program home and local area codes Feature setup Choose how to store repeat calls in call history Set call historyTurn caller ID with call waiting on or off Language Set the display languageBasic operation Make, answer or end a call HandsetMake, answer or end a call Headset Timer Volume Handset/Speakerphone/Headset volume controlRinger volume Redial Speakerphone or headsetDisplay dial Auto redial Press Auto Redial againHold Switch between lines during a callOptions while on calls To release hold and return to the callTo end a conference call, hang up MuteConference calls Place a conference call on holdLow battery indicator Conference calls Talk privately with one callerLights and what they mean One-touch speed dial Lower keyStore a number in one-touch Store a wait in a one-touch entry Store a pause in a one-touch entryStore a flash in a one-touch entry View a one-touch entryDial a one-touch number Edit a one-touch number Erase a one-touch numberChain dialing Directory operation Menu structureStore a name and number in the directory Store a wait in a directory number Review directory entries Edit a directory entry Edit a name in the directoryEdit a directory entry Edit a number in the directory Dial a number from the directory Primary line onRemove a name and number from the directory Caller ID operation Information about caller ID with call waitingHow caller ID works Call waiting Message waiting and NEW Call lightsCall history operation Review records in call history by line Remove all calls from call history . Press Call HistoryDial a number from call history Dial optionsSave a call history entry to the directory Error Display screen messagesOut of Area Troubleshooting Eliminate any background noise. Noise from a Troubleshooting One-touch operation beginning on NEW Call light flashesTime and date on Power Failure isMemory Error CID del shownImportant product information Especially about corded telephones Connection and use with the nationwide telephone network FCC and Acta informationProduct identifier and REN information Repair instructionsRights of the telephone service provider Programming/testing of emergency numbersHearing aid compatibility Part 15 of FCC rules Limited warranty What does this limited warranty cover?How long is the limited warranty period? How do you get warranty service? Other limitations Default settings Feature DefaultGeneral product care Technical specifications Index Index