PHONE SETTINGS
SET TIME/DATE
Telephone operation
Feature setup
Set the time and date
If you subscribe to caller ID service, the time and date are set automatically with each incoming call. You can set the time and date manually following these instructions.
. Press ENTER to begin feature setup.
2.Press 
until the screen displays PHONE SETTINGS.
3.Press ENTER. The screen displays PRIMARY LINE.
4.Press 
until the screen displays SET TIME/DATE.
5.Press ENTER. The screen displays Enter new time and the current setting.
6.Use the dial pad keys to begin entering the correct time (hh/mm). The digits of the new time will appear on the screen.
7.If needed, press 
or 
to toggle between AM and PM. Press ENTER when the choice is shown.
8.When the correct time is shown, press 
or 
until the screen displays DATE.
9.Press ENTER to save the time and move on to change the date. The screen displays Enter new time and the current setting.
0. Use the dial pad keys to begin entering the correct date (mm/dd). The digits of the new date appear on screen.
. When the correct date is shown, press ENTER to save the setting. The screen displays LCD BACKLIGHT.
2. Proceed to step 5 of Turn screen backlight on or off on page 23 to set the next feature (Screen backlight).
— OR —
Press and hold ENTER to return to the idle screen.
NOTE: If you try to save an invalid time or date, there will be a low pitch (error) tone and the date or time will not be changed.
22