Getting started
Installation options
Wall installation
1.Reposition the mounting bracket for wall use.
Press on the mounting bracket as shown in figure a to release the bracket. Rotate the bracket as shown in figure b so that the larger end is toward the bottom of the telephone. Lock the bracket by positioning it as shown in figure c, and pressing it (as shown by arrow) into the telephone base until it locks in place.
figure a | figure b | figure c |
2.Connect the short telephone line cord to the telephone.
Plug one end of the short line cord into the jack labeled TEL and thread the cord through the tabs under the telephone as shown.
DSL filter (not included) is required if you have DSL