Installation
Tabletop/desktop installation
continued from page 5
4. Connect the handset to the telephone.
Plug the coiled handset cord into the handset jack on the left side of the telephone base. Plug the other end of the coiled cord into the handset, then hang up.
5. Check for dial tone.
Lift the handset and listen for a dial tone. If you cannot hear a dial tone, press VOLUME 
. If you still do not hear a dial tone, see the In case of difficulty section, pages
Your phone will work immediately after installation using the default feature settings (see Default settings on page 31).
If you subscribe to caller ID services from your local telephone service provider, you must follow the instructions in Set home area code, (see page 11), for your phone to properly recognize and dial calls from the call history list. You may also need to check Set local area code (see page 12) if you want the phone to recognize multiple area codes.
6