Directory memory
Store numbers and names in the directory
1.Press 
, then 
. The screen displays 
2.Dial the telephone number you want to store (up to 24 digits).
Press 
to store the last number dialed.
If the redial number is longer than 24 digits, you will hear an error tone if you are off hook while storing the number. The number cannot be stored.
3.Press 
. The screen display includes
4.Use the Keypad characters chart on page
23 to enter a name up to 15 characters long. Use CALL LIST 
to backspace and CALL LIST 
to advance or add a space. When you want to enter two characters in a row which share a keypad button (for example M and O), you must press CALL LIST 
to move the cursor to the next position. There is no time limit for entering the name.
5.Press 
to store the name and number.
To exit the directory at any time without
saving changes, press CLEAR .
Store a pause or flash in a directory number
Press CALL LIST 
twice to store a pause in the dialing
sequence (the screen displays 
). Press 
to store a press of the flash button (the screen displays 
).
To exit the directory at any time without saving changes, press CLEAR .
24