Set Local Area Codes, Set Contrast, Set Time/Date

957_book_2ATT ill at margins 11/16/00 1:39 PM Page 9

FEATURE SETTINGS

Set Local Area Codes

You can program up to four local area codes.

If for	You dial	Enter in Step 2

All calls outside	11 digits	No local area codes
your area code	(1+ area code + phone number)

Some calls outside	10 digits	Area codes that do
your area code	(area code + phone number)	not require a “1”

If you dial 10 digits (area code plus phone number) for calls within your own area code, include your area code as a local area code.

1Press and release Ountil the screen displays:

LAC1-___

LOCL AREA CODE?

2Use the keypad to enter the three digits of the first local area code. The screen prompts you for the next local area code (LAC2Ð,

LAC3Ð, LAC4Ð).

3Press Owhen you are finished.

Set Contrast

Adjust screen lighting to a comfortable level, from 1 (light) to 4 (dark).

1Press and release Nuntil the screen displays SET CONTRAST.

2Press CALL LIST +or CALL LIST -until the screen displays the contrast level you prefer.

3Press N.

Set Time/Date

NOTE: The time/date are automatically reset each time new call information is received. Incorrect time/date will be corrected with next incoming call.

1Press and release O. The screen displays ENTER TIME?.

2Use the numbers on the keypad to enter the time. Press +to select AM; press -to select PM (the screen may not display PM until you have finished setting the time).

3Use the numbers on the keypad to enter the date. For example, press 0605to enter June 5. (Zeroes are not displayed.)

4Press Oto move to the next feature

—OR —

Wait 30 seconds for the phone to return to standby.