AT&T 8434 manual Reset Speakerphone, Or Dial Priority Calling code Dial tone

Speaker Reset Spkr

Priority Calling

To place a priority call (3-burst ring)

1Press [ Priority ]

or Dial Priority Calling code

[dial tone]

2 Dial extension [ringback tone]

3Wait for called party to answer

Note: If your call is not answered and you wish to redirect it to coverage, press [ Go to Cover ] while call is ringing.

To change a regular call into a priority call (when you hear a call waiting ringback tone)

1Press [ Priority ]

2Wait for called party to answer

Note: If you still receive a call waiting ringback tone, wait a few minutes and try again.

Reset Speakerphone

You can adjust the speakerphone to the surrounding room acoustics to provide optimal performance. Use the Reset Speakerphone feature in the following ways:

●Whenever you move your voice terminal to another place (even in the same room)

●Whenever the green light next to [ Speaker Reset Spkr ] flutters intermittently

Note: You may also use this feature when you are on a call in the unlikely event that your speakerphone makes a squealing noise during the call. When you press [ Select ] and [ Speaker Reset Spkr ] , your speakerphone will adjust itself to normal for that call. (No tones will be heard.) When you hang up from the call, you need to use the Reset Speakerphone feature again to set your speakerphone for future calls.

You can initiate the Reset Speakerphone feature when your handset is on-hook, or during a call in which you are using the built-in speakerphone. (If a call is in progress, you will not hear the tones, and the new speakerphone adjustment is reset for only the duration of that call.)

Important: If there has been an interruption in power (such as, the system has just been powered up again, or you have plugged in the voice terminal at another

location), the light next to [] flutters intermittently until you reset the built-in speakerphone.

21