AT&T 3.1 Important Safety Instructions, Additional Safety Instructions for Installation Personnel

Important Safety Instructions

The following list provides basic safety precautions that should always be followed when using your telephone equipment:

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on the product.

3.Unplug all telephone connections before cleaning. DO NOT use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4.This product should be serviced by (or taken to) a qualified repair center when service or repair work is required.

5.DO NOT use this product near water, for example, in a wet basement location

6.DO NOT place this product on an unstable cart, stand, or table.

7.Never push objects of any kind into slots or openings as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

8.Avoid using this telephone during an electrical storm. There may be a remote risk of electric shock from lightning.

9.DO NOT use the telephone to report a gas leak in the vicinity of the leak.

10.The product is provided with a three-wire grounding type plug. This is a safety feature. DO NOT defeat the safety purpose of the grounding type plug. DO NOT staple or otherwise attach the AC power supply cord to building surfaces.

CAUTION:

DO NOT block or cover the ventilation slots and openings. They prevent the product from overheating. DO NOT place the product in a separate enclosure unless proper ventilation is provided.

Additional Safety Instructions for

Installation Personnel

1.DO NOT install telephone wiring during a lightning storm.

2.DO NOT install telephone jacks in a wet location unless the jack is specifically designed for wet locations.

3.Never touch uninsulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface.

4.Use caution when installing or modifying telephone lines.

5.The control unit must be securely wall mounted.

CAUTION:

If any wiring from the extension jacks leaves the building premises, you must install AT&T IROB protectors (see “Requirements for Out-of-Building Extensions” on page 22).

CAUTION:

Use only AT&T-manufactured PARTNER modules in the PARTNER Plus Communications System.

CAUTION:

Environmental and electrical conditions must meet the specifications as listed on pages 21 and 22.

SAVE THESE INSTRUCTIONS

ii