AT&T 2448 installation instructions Important Safety Instructions

Page 3

IMPORTANT SAFETY INSTRUCTIONS

SPIRIT ® Communications System -2448 Controller/2448 Expansion Unit

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance instructions in the literature accompanying the product.

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury.

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on the product.

3.Unplug this product from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

4.Slots and openings in the housing are provided for ventilation. To protect it from overheating, these openings must not be blocked or covered. This product should never be installed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.

5.This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home or business, consult your dealer or local power company.

6.This product is equipped with a three wire grounding type plug. This plug will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your outlet. Do not defeat the safety purpose of the grounding type plug.

7.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it.

8.Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.

9.Never push objects of any kind into this product through housing slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

10.To reduce the risk of electric shock, do not disassemble this product. Call your AT&T representative when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly may cause electric shock when the appliance is subsequently used.

Image 3
Contents AT&T Page Important Safety Instructions Page Introduction Installation Attach Expansion Unit to Main Controller Mounting Holes and Distances Refer to Part D of Step