AT&T 205 user manual Wall Mount

Page 13

WALL MOUNT

1.Write your phone number on the "THIS NUMBER" label on the telephone base.

2.Reverse the handset tab as shown.

3.Connect the telephone line cord to the telephone.

4.Press the telephone line cord into the channel and thread excess cord on the telephone base. Connect the free end of the telephone line cord to the modular wall jack.

5.Hold the telephone against the mounting studs as shown, and pull the telephone down.

Telephone line jack

Modular telephone wall jack

Line cord

10

Image 13
Contents Trimline Page Table of Contents Important Product Information Safety InformationProduct identifier and REN information FCC and Acta InformationConnection and use with the nationwide telephone network Repair instructionsInterference Information Part 15 of FCC Rules Programming/testing of emergency numbersRights of the telephone company Hearing aid compatibilityLimited Warranty What is not Covered by this Limited WARRANTY? Other Limitations Location Care and MaintenanceAvoid rough treatment Parts Checklist Please see TABLE/DESK InstallationWall Mount Handset Installation Handset Operation OperationFlash RedialDial Mode Handset VolumeTelephone Base Operation No Dial Tone Case of DifficultyTelephone Does Not Ring or Rings Too Softly Calls Cannot Be Dialed or Are Dialed SlowlyPage