AT&T 260 user manual Set Local Area Codes

260book_1ATT 4/24 4/24/02 6:24 PM Page 12

FEATURE SETTINGS

Set Local Area Codes

Local Area Codes are area codes associated with other phone numbers for which you must dial the area code, but do not dial “1”. This includes your own area code if you must dial the area code but no “1” to make calls in your own area code.

You can program up to four Local Area Codes.

Do not program area codes for which you must dial a “1”.

If you dial…	For…	Then, in Steps 2-4
11 digits	All calls outside	Make no entry
(1+ area code + phone number)	your own area code
10 digits	Some calls outside	Enter area codes that
(area code + phone number)	your own area code	do not require a “1”
10 digits	All calls within your	Enter your own area
(area code + phone number)	own area code	code

1Press and release N until the screen displays:

LAC-___

LOCL AREA CODE?

2Press - or + until the screen displays the first digit of the first Local Area Code. Do not use the keypad to enter digits.

3Press D.

4Repeat Steps 2 and 3 for the second and third digits of the first Local Area Code.

5Press D.

6To program another Local Area Code, press D until the screen displays:

LAC2-___

LOCL AREA CODE?

7Repeat Steps 2–5to enter the digits of the next Local Area Code.

8Repeat Steps 6 and 7 to program a third and fourth Local Area Code.

12