AT&T 260 user manual One-Touch Dialing Two-Touch Dialing, Storing Memory Numbers

260book_1ATT 4/24 4/24/02 6:24 PM Page 19

TELEPHONE MEMORY

NOTE: Press

on the back of the

handset while storing

a memory number to

exit programming.

One-Touch Dialing

Two-Touch Dialing

For two-touch dialing:

1Lift the handset.

2Press and release M, then press the number button (0-9) where the memory number is stored. The number appears on screen as it is dialed.

Storing Memory

Numbers

1Lift the handset.

2Press and release p.

3Dial the telephone number (up to 24 digits)

— OR —

For one-touch dialing, lift the handset and press the memory button. The number appears on screen as it is dialed.

Storing a Pause in a

Memory Number

Press and release once to store a 2.5-second pause in the dialing sequence, twice for a 5.0-second delay, three times for a 7.5-second delay.

NOTE: Each 2.5 second pause counts as one digit when storing numbers in telephone memory.

Press to store the last number dialed from this phone.

4For one-touch dialing, press and release the memory button where

you want to store the number (locations X, Y, and Z)

— OR —

For two-touch dialing, press M, then press the number button (0–9) where you want to store the number.

19