Acer 1680 manual No beep Error Messages FRU/Action in Sequence, Lcd

Error Message List

No beep Error Messages	FRU/Action in Sequence
No beep, power-on indicator turns off and LCD is	Power source (battery pack and power adapter). See “Power
blank.	System Check” on page 70.
	Ensure every connector is connected tightly and correctly.
	Reconnect the DIMM.
	LED board.
	System board.
No beep, power-on indicator turns on and LCD is	Power source (battery pack and power adapter). See “Power
blank.	System Check” on page 70.
	Reconnect the LCD connector
	Hard disk drive
	LCD inverter ID
	LCD cable
	LCD Inverter
	LCD
	System board
No beep, power-on indicator turns on and LCD is	Reconnect the LCD connectors.
blank. But you can see POST on an external	LCD inverter ID
CRT.	LCD cable
	LCD inverter
	LCD
	System board
No beep, power-on indicator turns on and a	Ensure every connector is connected tightly and correctly.
blinking cursor shown on LCD during POST.	System board
No beep during POST but system runs correctly.	Speaker
	System board

Chapter 4 76