260book_1ATT 4/24 4/24/02 6:24 PM Page 3
INSTALLATION
Battery Installation
This telephone requires four AA batteries (not included) in order for the Caller ID with Call Waiting, Memory, and New Call light to work. For best results use alkaline or heavy duty batteries
1Press on the tab to remove the battery compartment cover.
Battery compartment cover
2Install four AA batteries (not
included) in the battery compartment.
Battery compartment recess for easy battery removal
3Replace the battery compartment cover by aligning the bottom tabs on the cover with the slots on the base and snapping into place.
NOTE: Once the batteries are installed, the screen will show 12:00 and the clock will begin to run. The clock will be reset to the correct time when the first Caller ID data is received.
3