Venting Requirements, Plan Vent System | Whirlpool 8535899 specs

Venting Requirements

WARNING

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death or fire.

WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED OUTDOORS.

4 in. (10.2 cm) heavy metal exhaust vent and clamps must be used. DURASAFE™ venting products are recommended.

DURASAFE™ vent products can be purchased from your dealer or by calling Whirlpool Parts and Accessories. For more information, see the “Assistance or Service” section of your “Dryer User Instructions.”

■The dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling, or a concealed space of a building.

■Do not use an exhaust hood with a magnetic latch.

■Do not install flexible metal vent in enclosed walls, ceilings or floors.

■Use clamps to seal all joints. Exhaust vent must not be connected or secured with screws or other fastening devices which extend into the interior of the duct. Do not use duct tape.

IMPORTANT: Observe all governing codes and ordinances.

Improper venting can cause moisture and lint to collect indoors, which may result in:

Moisture damage to woodwork, furniture, paint, wall- paper, carpets, etc.

Housecleaning problems and health problems.

Use a heavy metal vent. Do not use plastic or metal foil vent. Rigid metal vent is recommended to prevent crushing and kinking.

Flexible metal vent must be fully extended and supported when the dryer is in its final position. Remove excess flexible metal vent to avoid sagging and kinking that may result in reduced airflow and poor performance.

An exhaust hood should cap the vent to prevent rodents and insects from entering the home.

Exhaust hood must be at least 12 in. (30.5 cm) from the ground or any object that may be in the path of the exhaust (such as flowers, rocks or bushes, etc.).

If using an existing vent system, clean lint from the entire length of the system and make sure exhaust hood is not plugged with lint. Replace any plastic or metal foil vent with rigid metal or flexible metal vent.

Plan Vent System

Typical exhaust installations

Typical installations vent the dryer from the rear of the dryer.

1. Dryer		5. Clamps
2.	Elbow	6.	Rigid metal or flexible metal vent
3.	Wall	7.	Vent length necessary to connect
4.	Exhaust hood		elbows
		8.	Exhaust outlet

Standard exhaust installation with rigid metal or flexible metal vent

Alternate installations for close clearances

Venting systems come in many varieties. Select the type best for your installation. Two close-clearance installations are shown. Refer to the manufacturer’s instructions.

1.Over-The-Top installation (also available with one offset elbow)

2.Periscope installation

NOTE: The following kits for close clearance alternate installations are available for purchase. Please reference the “Assistance or Service” section of your “Dryer User Instructions.”

■Over-The-Top Installation: Part Number 4396028

8535899 specifications

The Whirlpool 8535899 is an innovative and highly efficient appliance designed to enhance the functionality of home kitchens. As a critical component in Whirlpool's extensive array of products, this particular model often serves as a replacement part, providing longevity and reliability to users.

One of the standout features of the Whirlpool 8535899 is its durability. Designed to withstand the rigors of daily use, it typically consists of high-quality materials that ensure a long lifespan. This durability is crucial for homeowners seeking a dependable appliance, as it reduces the need for frequent replacements and repairs.

The Whirlpool 8535899 is engineered with advanced technology in mind. It often incorporates user-friendly controls that make operation intuitive, allowing users to navigate settings effortlessly. This ease of use is complemented by efficient energy consumption, as the model is designed to be eco-friendly while maintaining outstanding performance. Whether it’s for cooking, food preservation, or cleaning, the appliance's efficiency translates into lower utility bills and reduced environmental impact.

Another defining characteristic of the Whirlpool 8535899 is its adaptability. This model generally fits a variety of kitchen configurations, making it suitable for both small and large homes. Its sleek design and modern aesthetic also ensure that it blends seamlessly into any kitchen decor, providing both functionality and style.

Additionally, the Whirlpool 8535899 is often equipped with features that enhance user convenience. These may include adjustable racks, quick-connect options, and versatile settings that cater to different cooking or cleaning needs. This flexibility is particularly beneficial for families that require an appliance capable of handling various tasks simultaneously.

Maintenance is a breeze with the Whirlpool 8535899 as well. Many users appreciate the easy-to-clean components that help maintain hygiene and cleanliness with minimal effort. Moreover, the availability of replacement parts further emphasizes Whirlpool's commitment to customer support and product longevity.

In conclusion, the Whirlpool 8535899 stands out in the appliance market for its durability, advanced features, energy efficiency, and user-friendly design. Ideal for those seeking a reliable home appliance, it represents a harmonious blend of innovation and practicality, making it a valuable addition to any kitchen.