*Caller’s Name
*Caller’s Number
*Date and Time of Call
*New Indicator
*Call Waiting Indicator
Note: The unit will only receive Caller ID on Call Waiting information from the telephone that is connected to it. If the AC adapter is not properly connected to the AT50CWLD, Caller ID on Call Waiting will not be received.
CALLER ID CALLBACK
The AT50CWLD can dial a telephone num- ber from the Caller ID memory using the Callback feature.
1.Press the REVIEW 2 or 5 keys to dis- play the call record you want to call back.
2.Press the CALLBACK key, the display will show "Lift Handset" not “Dialing”. The number will appear on the screen. Add the prefix "1" to a ten digit number by quickly pressing the CALLBACK key 1 time. The digit “1” is NOT automatically added. When you “Lift Handset” the num- ber will automatically dialed.
Screen will not show PICKUP HANDSET
ERROR MESSAGES
ERROR is displayed if the call information is not received correctly due to bad transmission (static on line) or if you pickup the phone before the second ring.
This means that the call had some or all of the Caller ID information missing and cannot be displayed correctly. The ERROR message will go away after 20 seconds, or if another call is received.
CARE AND MAINTENANCE
Your system is an example of superior design and craftsmanship. The following suggestions will help you care for your Caller ID unit so you can enjoy it for years.
*Keep the unit dry. If it gets wet, wipe it dry immediately. Liquids can contain minerals that can corrode the electronic circuits.
*Handle the unit carefully. Dropping it can damage circuit boards and cases and can cause it to work improperly.
*Use and store the unit only in normal tem- perature environments. Temperature extremes can shorten the life of electronic devices and distort or melt plastic parts.
*Keep the away from dust and dirt, which can cause premature wear of parts.
*Use only fresh batteries of the required size and type. Never leave a dead or weak battery in the unit. It might leak chemicals that can damage the unit.
*Wipe the unit with a damp cloth occasion- ally to keep it looking new. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it.
TROUBLESHOOTING
If you experience trouble with the unit, dis- connect it from the telephone line and con- nect a known working unit to the line. If the known working unit does not operate prop- erly and displays the same symptoms contact your local telephone company for assis- tance. If the known working unit does oper- ate properly, try to solve the problem with the steps below.
Telephone Rings but There is No Caller ID Data
*Check with your telephone company to be sure Caller ID service is activated.
*Check to see if the batteries need replacing.
*Did you let the telephone ring 2 times?
*Make sure all line cord connections are correct.
Wrong Language is Display
* See Setting the language section.
ERROR Appears on the Display
*You may have received a bad transmis- sion. The message will remain on the dis- play for 20 seconds.
*If you pick up the telephone before the sec- ond ring, the caller information may not be completely received resulting in an ERROR message.
*If you have an answering machine con- nected to the same line, make sure it is set to answer after two or more rings so it does not interfere with receiving Caller ID data.
The Display is Blank or Dim
*The batteries need to be replaced. See Battery Installation & Replacement section.
No Caller ID in “Call Waiting” (AT- 50CWLD only)
*Requires subscription to Caller ID on Call Waiting service offered by you local tele- phone company.
*The AC adapter is not properly connected.
*You are
phone connected to the unit must be off hook to receive the Call Waiting ID.
IMPORTANT SAFETY INSTRUCTIONS This symbol is alert you to important 
operating or servicing instructions
that may appear in the user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electrical shock.
When using this product, basic safety pre- cautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1.Read and understand all instructions. 2.Follow all warnings and instructions
marked on the product.
3.Unplug this product from the wall outlet before cleaning. Do not use liquid clean- ers or aerosol cleaners. Use damp cloth for cleaning.
4.Do not use this product near water; for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet base- ment or near a swimming pool.
5.Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
6.Slots and openings in the cabinet back or bottom are provided for ventilation. To protect it from overheating, these openings must not be blocked by placing the prod- uct on the bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in an enclosed environment unless proper ventilation is provided.
7.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by animals or persons walking on it.
8.Do not overload wall outlets and extension cords as this can result in risk of fire or electrical shock.
9.Never spill the risk of electrical shock, do not disassemble this product. Instead take it to a qualified service person when serv- ice or repair work is required. Opening or removing covers may expose you to dan- gerous voltage or other risks. Incorrect re- assembly can cause electrical shock when the appliance is subsequently used.
IF YOUR PRODUCT UTILIZES BAT- TERIES, THE FOLLOWING ADDI- TIONAL PRECAUTIONS SHOULD BE
OBSERVED
1.Use only the type and size of batteries specified in the users manual.
2.Do not dispose of the batteries in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
3.Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
4.Exercise care in handling batteries in order not to short the battery with con- ducting materials such as ring, bracelets and keys. The battery or conductor may overheat and cause burns.
5.Do not attempt to recharge the batteries with or identified foe use with this prod- uct. The batteries may leak corrosive electrolyte or explode.
6.Do not attempt to rejuvenate the batteries provided with or identified for use with this product by heating them. Sudden release of battery electrolyte may occur causing burns or irritation to eyes or skin.
7.When replacing batteries, all batteries should be replaced at the same time. Mixing fresh and discharged batteries could increase internal cell pressure and
rupture the discharged batteries. 8.When inserting the batteries into the
product, the proper polarity or direction must be observed. Reverse insertion of batteries can cause charging, which may result in leakage or explosion
9.Remove the batteries from this product if the product will not be used for a long period of time (several months or more) since during this time the batteries could leak, damaging the product.
10.Discard “dead” batteries as soon as possible since they are more likely to leak in a product.
11.Do not store this product, or the batter- ies provided with or for identified use with this product, in high temperature areas.
12.If your product uses a rechargeable bat- tery, charge the battery(ies) only in accordance with the instructions and lim- itation specified in the User Manual.
SAVE THESE INSTRUCTIONS
CC2014 Rev 1.0