Swiss Diamond IP10S Appendix, Troubleshooting, Problem Possible cause Remedy, Warranty conditions

Page 42

Appendix

Troubleshooting

If your phone is not functioning as it should, first try to find the fault in the following table. The following tips should help you correct the fault:

Problem

Possible cause

Remedy

No dialing tone.

No connection to the LAN.

Ensure that the LAN connection

 

 

 

cables on the phone and at the

 

 

 

LAN socket are correctly

 

 

 

plugged in.

No display.

No power.

Ensure that the power cable jack

 

 

 

is correctly plugged in, or if the

 

 

 

phone should normally be

 

 

 

powered by the network, inform

 

 

 

your system administrator.

"Waiting for call manager"

One of the following parameters

Check these parameters with

message, no dialing tone.

is not set correctly:

your system administrator.

 

-

Phone IP address

 

 

-

Call agent address and subnet

 

 

 

mask

 

 

-

Gateway address

 

 

 

 

Your call partner cannot hear

The handset cable is not

Ensure that the handset cable is

you or you cannot hear him.

correctly plugged in.

correctly plugged into the

 

 

 

handset and the telephone.

Time is not the one you’ve

Time is automatically specified

Ask your system administrator.

programmed.

by the network.

 

"Phone needs to be rebooted"

Following changes in the

Press the "OK" key to reboot the

message.

configuration of the phone, a

phone.

 

reboot is needed to take effect.

 

Phone does not always ring.

Call forwarding active or Do not

Read the relevant section of the

 

disturb facility set.

user guide.

Warranty conditions

Your product is covered by a guarantee that is in accordance with the legal provisions of the country in which you purchased the product and which runs from the date of purchase. Please retain the receipt as proof of the date of purchase. Within the guarantee period, all faults that are the result of defective materials or manufacturing faults will be repaired free of charge. Repairs under guarantee will either be carried out by repairing the defective product or exchanging it, at the supplier’s discretion. Defects that do not significantly affect the value or use of the product as well as expendable items or damage that has been caused by improper use, through fair wear and tear or by interference with the product from third parties, are not covered by the guarantee. Possible consequential damages resulting from the use, the failure or faults on the product, in particular any liability for pecuniary loss, are excluded from this guarantee.

IP10S / IP10 user guide

41

02P182000Aen

Image 42
Contents IP10S / IP10 Contents Call lists AppendixOperating conditions For your safetyCertification information LocationSecurity Qualified serviceConnection CareYour phone IntroductionKeys version a Display keys Audio keys Dialing keys Keys version B Display keysIndicators Indicators in standby modeAudio keys Dialing keys Indicators in connected mode Package contents InstallationGetting started Getting started Making a call using the phone book Call functionsMaking a call Dialing using the call lists Speed dialing a phone numberLast number redialing From the unanswered calls message From the call listsAnswering a call Adjusting the ring volumeMaking a call with a headset Display of caller’s identityGroup listening Volume adjustmentOptions during a call Hands-free operationEnquiry call Telephony servicesUsing services during a call BrokeringConference Using services in standby modeUsing services Blind TransferVoice Mail Pick upDo not disturb Scroll to Do not disturb OFF Call ForwardStandby mode Phone bookSaving names and phone numbers Searching for names and phone numbers Scrolling in the phone bookDuring a call Modifying names and phone numbers Erasing names and phone numbersMemory keys Save memory keysSpeed dialing using memory keys Activating a functionDeactivating a function Call lists Unanswered callsErase call lists Select it by pressing the OK keyUsing the menu Accessing a menu functionList of menu functions List of memory keysAdmin settings Clock Configuring user parameters Melody VolumeRinging tones Display RhythmLanguage TextContrast HeadsetPassword Voice mail numberReset AlarmClock Viewing administrator parameters Clock settingDate setting Configuring through a Web browser Connecting to the IP phone Web serverBefore you begin General information Web page languageUser settings Import private phone book User logoPhone books Manage private phone bookWarranty conditions TroubleshootingProblem Possible cause Remedy AppendixCompliance and safety information Declaration of conformity for the European Community