| PAGE 11 of 14 |
MODEL TI984 TELEPHONE INTERFACE | |
|
|
| Programming Table |
|
|
|
|
Function | RESET UNIT TO FACTORY CODES (DEFAULT) |
|
|
KEY SEQUENCE | # # |
|
|
DESCRIPTION | Voice access method (for incoming calls) |
(Day Mode) | |
| 60 seconds after the page for the call to be answered before disconnection |
| |
| 4 incoming rings before TI984 enters page mode |
| 7 second hang up delay |
| Internal Day/Night switch |
|
|
DESCRIPTION | Ring access method (for incoming calls) |
(Night Mode) | 1 incoming ring before TI984 generates a ring tone on the page line |
| 7 second hang up delay |
| Internal Day/Night switch |
|
|
*Function | SELECT INCOMING CALL - MANUAL ACCESS METHOD |
|
|
KEY SEQUENCE | # 3 3 |
|
|
DESCRIPTION | If selected, a switchboard operator must manually connect the telephone call to the |
| Page/Party® system by pressing the ACCESS button on the front cover of the TI984. |
| The incoming call is automatically transferred to the designated party line, provided |
| a station is |
|
|
*Function | SELECT INCOMING CALL - VOICE ACCESS METHOD |
|
|
KEY SEQUENCE | # 3 0 P P M M A |
|
|
DESCRIPTION | If selected, incoming calls are transferred directly to page line. |
| PP = number of seconds of voice page (00 to 99) |
| MM = number of seconds after a page that the call must be answered (00 to 99) or |
| the call is disconnected |
| With |
| designated party line after the page, provided the designated party line is in use. |
| A = |
| Example: To set a |
| page before the call reverts to the |
| connect option, enter the following code: # 3 0 1 5 2 5 1 |
|
|
*Function | SELECT INCOMING CALL - RING ACCESS METHOD |
|
|
KEY SEQUENCE | # 3 1 |
|
|
DESCRIPTION | If selected, incoming calls are transferred directly to the page line after a |
| programmed number of rings have elapsed. To answer the call, someone must take |
| a Page/Party® station |
|
|
f:\standard ioms - current release\42004 instr.
05/03