Specifications

	PAGE 14 of 14
MODEL TI984 TELEPHONE INTERFACE	42004-071F

FCC Registration Number		ADG9ZP-16816-VH-E
Ringer Equivalency (REN)		0.4B
Telephone Network Interface		Telephone Central Office Line or PBX Line, (USOC) RJ11 jack,
		using 2-wire loop start (bridged ringing) circuit
Power input		105-130/210-260 V ac, 50-60 Hz, or 23-28 V dc, 30 watts max.
Network signaling		DTMF
Controls		Access, Reset, and Day/Night front panel switch;
		page line, party line, and sidetone level controls inside enclosure
Material/finish		High-impact, glass-reinforced polyester, gray;
		internal circuitry surrounded by metal shields
Mounting		Wall or column, four 0.280-inch mounting holes
Connections	4 drill spots for locating conduit; entrance to internal terminal block connections;
		14-foot cable with USOC RJ11C-type modular jack for telephone subset
Dimensions		9.5 H × 8 W × 3.8 D inches; (241 × 201 × 97 mm)
Temperature range		0º C to +70º C (+32º F to +158º F)
Environmental rating		NEMA-12 dust-tight and drip-tight indoor enclosure
Weight		9 lbs. (4.08 kg)
Page/Party® Interface
Page line		33 ohm nominal load impedance (from line balance assembly)
Party line		33 ohm nominal ac source impedance (internal line balanced)
Output level		Adjustable; 1.5 VRMS nominal

	Replacement Parts

Part Number	Description


12513-003	Hinge Replacement Kit/Internal Plugs

12516-001	Screw Pack, Phillips 1/8 inch (10 pack)

61007-002	Cable Assembly, 4-conductor, 14 foot

69101-001	PCBA, Telephone Interface Power Supply/Termination Board

69111-001	PCBA, Programmable Telephone Interface Board

69112-001	PCBA, Programmable Telephone Interface LED Switch Board

f:\standard ioms - current release\42004 instr. manuals\42004-071f.doc

05/03

Replacement Parts