Sonic Alert AMPLI600 manual Setting the Remote Audio Monitoring Access PIN Code

REMOTE MONITORING

Setting the Remote Audio Monitoring Access PIN Code

The speakerphone will identify the PIN number for Remote Audio Monitor- ing. The Access PIN code is factory preset to the sequence 1234. It can be changed as follows:

Press MUTE

Use ▲ or ▼ to select ‘SET SOS’

Press OK

Use ▲ or ▼ to select ‘PIN CODE’

Press OK

Use C to delete existing digits

Enter your new code (max 4 digits)

Press OK

Press C twice to exit

Using Remote Audio Monitoring

These are instructions for your remote emergency contact caller. Ensure you provide them with the remote PIN code!

1.Dial as if it was a regular phone call. You will hear a “beep” after 10 dialing tones.

2.You will have 10 seconds to enter the Remote Audio Monitor Access PIN Code on your keypad (the access code is 1234 unless it has been changed). This turns on the speakerphone of the AMPLI600 phone and allows you to listen in and have a two-way conversation.

3.Every 2 minutes another “beep” will be audible and you will need to press any of the 0-9 keys to continue; otherwise the AMPLI600 will hang up.

28