Sonic Alert AMPLI600 manual No response on LCD display, No ampliﬁcation, No Numbers in memory

Page 43

TROUBLESHOOTING

call is from an area not providing caller display, Unavailable number will be displayed

●It could be a call from a PBX. Caller display may not work properly if

the telephone is connected to a PBX

No response on LCD display

●If you have experienced a power failure the batteries may become weak. If the power is restored and the LCD display still does not re-

spond then replace the batteries with new ones.

No Strobe Ringer and/or bed shaker will not activate

●Make sure the strobe and/or shaker switch is turned “ON

●Make sure the Bed Shaker is plugged in correctly

No ampliﬁcation

●1. Check to see if the AMPLI amplify button is “ON”. You should see the red light

There is Interference on the line

●A filter may be required for homes with DSL line.

There is a red light that continues to ﬂash.

●You have un-reviewed Caller ID / Call Waiting information or missed a call.

No Numbers in memory

●No number stored in that memory button.

●If your phone has been disconnected for a few hours the numbers stored will be lost.

Emergency Connect button is not working

●There may be a phone off the hook somewhere in your home.

●Check the Auto On Hook Feature

●The remote band’s battery is low or is not installed properly.

●Check the antenna on base.

43

Image 43

Contents Page Contents Unpacking the Ampli600 IntroductionSetting Up InstallationDesk Installation Wall Mount Installation Description Remote controlPage Screen example On hook position Screen display Page Ringer Tones SettingsRinger Volume Alarm and Ringer SettingsDialling Mode Format Date / Time Format and settingSetting Time/date Language SettingAuto On Hook Screen Contrast AdjustmentAuto Screen Sizing -DIMX--x Area and Long Distance Code Setting Answering a Call Using the TelephoneMaking a Call Call Time Counter Switching between Speakerphone and HandsetLast Number Redial Deleting Recent Numbers Recalling Recent NumbersMute Function Flash To store a number One Touch Memory KeysDialling stored Numbers Create Emergency Contact SOS Numbers Emergency ContactCreate the Emergency SOS Message Play the Emergency SOS Message Using the Emergency Contact TelephoneRemote Audio Monitoring Testing the Remote BandChange the Remote Band Battery Cancel an Emergency Contact SOS CallActivate Remote Audio Monitoring Remote MonitoringUsing Remote Audio Monitoring Setting the Remote Audio Monitoring Access PIN CodeHeadset Optional AccessoriesTo use the headset Shaker Extra Volume Adjustment Switch Volume and ToneSending Level Adjustment Receiving Volume and Tone AdjustmentHandset Ampliﬁer Create a Phonebook Entry PhonebookKey Characters Create an Entry from the Caller Display Log Delete a Phonebook Entry Make a call from a Phonebook EntryModify a Phonebook Entry Caller Display Delete a Number from the Caller Display Log Use a Number from the Caller Display LogCall Waiting Delete all Numbers from the Caller Display LogCall Waiting in Practice Message Waiting LED NEW CALL/MESSAGE LEDTelephone does not ring TroubleshootingNo number is displayed when the telephone rings No displayThere is Interference on the line No response on LCD displayNo Strobe Ringer and/or bed shaker will not activate No ampliﬁcationEnvironmental Safety InformationCleaning GeneralRegulatory Compliance This equipment is hearing aid compatible Guarantee East Maple Rd Troy, MI Ph 248577 Fax