Furuno FM-8700 manual Safety Instructions

Page 4

SAFETY INSTRUCTIONS

WARNING

Do not open the equipment.

Hazardous voltage which can cause electrical shock, burn or serious injury exists inside the equipment. Only qualified personnel should work inside the equipment.

Do not disassemble or modify the equipment.

Fire, electrical shock or serious injury can result.

Turn off the power immediately if water leaks into the equipment or the equip- ment is emitting smoke or fire.

Continued use of the equipment can cause fire or electrical shock.

Do not place liquid-filled containers on the top of the equipment.

Fire or electrical shock can result if a liquid spills into the equipment.

Do not operate the equipment with wet hands.

Electrical shock can result.

Keep heater away from equipment.

Heat can alter equipment shape and melt the power cord, which can cause fire or electrical shock.

Any repair work must be done by a licensed radio technician.

Improper repair work can cause electrical shock or fire.

CAUTION

Do not touch any part of the antenna when the equipment is transmitting.

Electrical shock can result.

Use the proper fuse.

Use of a wrong fuse can result in fire or permanent equipment damage.

Do not use the equipment for other than its intended purpose.

Personal injury can result if the equipment is used as a chair or stepping stool, for example.

Do not place objects on the top of the equipment.

The equipment can overheat or personal injury can result if the object falls.

ii

Image 4
Contents VHF Radiotelephone FM -8 7 0 Canceling Distress Alert Safety Instructions Table of Contents SP-1 Index-1Foreword Word to FM-8700 OwnersFeatures Program numberSystem Configuration ViiThis page is intentionally left blank VHF Radiotelephone Operational Overview Front PanelTurning the Power On/Off VHF Controls, IndicationsAdjusting Squelch, Selecting Operating Functions Adjusting Volume of LoudspeakerSelecting Channel Modes, Channels Selecting Output Power TransmittingTurning the Loudspeaker On/Off Automatic Selection of CH16Dual Watch ScanningRemarks on Voice Communications PriorityDSC Controls, LED Warnings DSC Terminal Operational OverviewDSC controls LED warnings DSC control description Key Function/PurposeWhen blinking question mark appears DSC Operational OverviewStandby display Selecting and registering itemsPreparing and transmitting DSC messages Prepare message and then transmit it as followsDistress alert transmission and output power When keyboard input is prohibitedTurning Remote & Auto Acknowledge On/Off Auto acknowledge is automatically disabled when…Limit acknowledge This page is intentionally left blank DSC Distress Communications Distress Alert TransmissionProvide the following information to the coast station Distress callCanceling manually entered data Manual Entry of Ship’s Position and TimeEntering data manually Confirming Ships Position and TimeCanceling a Distress Call Within five seconds after pressing the Distress keyProcedure when in area A1 Receiving distress alert from other vesselDSC Distress alert received Transmitting Dist ACK over CH16 Transmitting Dist ACK signal To transmit the Dist ACK signal, do the followingDistress Alert Relay When you should relay a distress alertRelaying a distress alert Manually enter time of distress Press the ENT key twice Wait for relay ack This page is intentionally left blank DSC Operation for NON-DISTRESS Cases General procedure for transmitting an individual callTransmitting Individual Calls Detailed procedure for transmitting an individual call Prepare and transmit a message as followsFrom previous Transmission time about 0.5 secondsAfter receiving the ACK BQ signal, do the following From previousSetting of Able or Unable Receiving Individual Calls ACK RQReceiving individual call with Auto ACK on Receiving ACK RQ with Auto ACK OFF Received * ACK RQ IDPage Transmitting All Ships Calls General procedure for transmitting an all ships callPurpose of all ships call Detailed procedure for transmitting an all ships call To return to previous menu, press the t key From previous Receiving All Ships Calls Status of FM-8700 when receiving an all ships callReceiving an all ships call in on hook status Select END and press the ENT key Receiving an all ships call in off hook status Listen to contents of message Preparing and Saving Messages How to prepare transmit messagesPrepare message as follows Page Writing Over Files How to write over filesExample You want to write over file saved under file number Opening a file Opening, Transmitting FilesTransmitting a file Opening a transmit message Transmit/Receive Message MemoryPress the 9 Xmtd key at the standby display Transmitting retrieved message You can transmit a retrieved message as followsOpening a receive message Receive message memoryPress the 8 Rcvd key at the standby display Select ORDINARY, then press the ENT key This page is intentionally left blank How to select other calling types Other Calling TypesSelection of Other Calling Types Calling types descriptionShips, by using urgent category, that own ship Dividual calls. Refer toDistress call. Refer to ID numberDetailed procedure for making a telephone call Basic procedure for making a telephone callMaking Telephone Calls Pstn Call Operation after making DSC telephone call Receiving Telephone Call from Coast Station Other Station IDs and Telephone Numbers Registering other station IDs, telephone numbersOpening other station IDs, telephone numbers Automatic or Manual Printing Printer setup User PreferencesSelecting automatic or manual printing Automatic printingManual printing Printing Timing of 4 key pressing Example PringoutExample printouts Turning Key Beep On/Off Alarm Setup How to turn receive alarm on/off, select distress alarm toneThis page is intentionally left blank How to confirm own ships ID System ConfirmationConfirming Own Ship’s ID Own ship’s ID can be confirmed as followsHow to confirm ROM version no Confirming ROM Version NoConfirming VHF Section Settings How to confirm VHF section settingsConfirming VHF Channels How to confirm VHF channelsYou can confirm VHF channels registered as follows Confirming Tx Output Power How to confirm Tx output powerThis page is intentionally left blank Maintenance & Troubleshooting MaintenanceTroubleshooting When the power cannot be turned onDiagnostic Test How to start the diagnostic testsTransmit Power NG This page is intentionally left blank Specifications of Marine VHF Radiotelephone Power Requirements Appendix Menu TreeDist Ship ID POS & Time Distress Dist ACK Marine VHF Channel Lists Marine VHF Channel Frequencies International versionPage Marine VHF Channel Frequencies USA version Weather Channels Included in US version Private Channels U.K. MarinersPrivate Channels Netherlands Inland Digital Interface IEC 61162-1 Edition Input sentencesLoad requirements as listner IsolationGGA Global positioning system GPS fix data GLL Geographic position latitude and longitude RMA Recommemded minimum navigation information Loran C data RMC Recommended minimum specific GPS/TRANSIT data This page is intentionally left blank Index Index-1