Wiring Instructions

PABX LOOP TRUNK PORT OR ELECTRONIC KEY SYSTEM LINE BUTTON

TIP

RING

-24VDC POWER SUPPLY

AGROUND

ABATTERY

BGROUND

BBATTERY

PUNCHDOWN BLOCK

(W/BL) 26

(BL/W) 1

(W/O) 27

(W/G) 28

(W/S) 30

(S/W) 5

(R/BL) 31

(BL/R) 6

(R/G) 33

(G/R) 8

(R/BR) 34

(BR/R) 9

(V/BR) 49

(BR/V) 24

(V/S) 50

(S/V) 25

V-1101A

T (W/BL) R (BL/W)

H (W/O)

DIR (W/G)

BFT (W/S)

BFR (S/W)

A1 (R/BL)

A1 (BL/R)

MT (R/G)

MR (G/R)

PG (R/BR)

OUT (BR/R)

AG (V/BR)

AB (BR/V)

BG (V/S)

BB (S/V)

ONE-WAY AMPLIFIED SPEAKER ASSEMBLIES

FIGURE 3

ELECTRONIC KEY SYSTEM LINE BUTTON ACCESS OR PABX LOOP TRUNK ACCESS

Place a check by each step as it is completed.

__ 1.		Add a strap on the V-1101A punchdown
		block from Tip to BFT (W/BL to W/S).
__ 2.		Add a strap from Ring to BFR (BL/W to
		S/W).
__ 3.		Add a strap from H to DIR (W/O to W/G).
__ 4.		Add a strap from DIR to Red/Blue (W/G to
		R/BL).
__ 5.		Add a strap from Blue/Red to BG (BL/R to
		V/S).
__	6.	Connect Tip of the one-way amplified
		speaker assemblies to the V-1101A PG lead
		(R/BR).
__	7.	Connect Ring of the speakers to the OUT
		lead (BR/R).
__	8.	Connect the GND terminal of the speakers
		(black lead of horns) to the power supply
		Ground ("+" or "B Ground").
__	9.	Connect the –24 Vdc lead of the speakers
		(white lead of horns) to the power supply
		–24 Vdc ("-" or "B Battery").
__ 10.		Plug in the power supply.
__ 11.		Test the unit by connecting a lineman's test
		set across the V-1101A Tip and Ring:
__		(a) Go "off hook" and speak. Your voice
		should come out the speakers.
__		(b) If you hear the page: disconnect your
		test set and go to step 12.

__	(c) If you do not hear the page:
	(1) unplug the power supply;
	(2) go back to step 1 and recheck all
	your connections.

__ 12. Connect the tip (W/BL) of the V-1101A to Tip of your telephone system loop trunk port (PABX) or C.O. line position (E-key).

__ 13. Connect the Ring (BL/W) of the V-1101A to Ring of the telephone system.

__ 14. Test the system by dialing the proper trunk

	access code (PABX) or pressing the
	appropriate line key (E-key) and speaking
	into the handset:
__	(a) If you hear the page, go to step 15.
__	(b) If you do not hear the page, verify proper
	telephone system configuration and
	programming. If you have programming
	questions, contact the telephone system
	manufacturer.

__ 15.	Adjust the volume controls on the individual
	speakers to the desired levels.
__ 16.	If background music is to be provided:
__	(a) Connect the music source to the
	V-1101A MT and MR (R/G and G/R).
__	(b) With the V-1101A idle adjust the music
	source volume control to provide the desired
	level at the speakers.

947101