Valcom V-1101A specifications Have been performed properly and all

Page 9

 

PUNCHDOWN

V-1101A

 

 

BLOCK

 

 

TIP

(W/BL)

26

T

(W/BL)

RING

(BL/W)

1

R

(BL/W)

 

(W/O)

27

H

(W/O)

CONTACT

(O/W)

2

DIR (W/G)

 

 

 

MT

(R/G)

 

 

 

MR (G/R)

 

 

 

PG (R/BR)

 

 

 

 

OUT(BR/R)

 

A GROUND

(V/BR)

49

AG (V/BR)

(BR/V)

24

AB (BR/V)

A BATTERY

(V/S)

50

BG (V/S)

B GROUND

(S/V)

25

BB (S/V)

B BATT

 

 

 

 

FIGURE 6

PAGE PORT ACCESS

ONE-WAY AMPLIFIED SPEAKER ASSEMBLIES

WIRING INSTRUCTIONS:

Place a check by each step as it is completed.

__ 1. Connect the Tip (W/BL) of the V-1101A to Tip of your telephone system page port.

__ 2. Connect the Ring (BL/W) lead to Ring of the page port.

__ 3. Add a strap on the V-1101A punchdown block from H to DIR (W/O to W/G).

__ 4. Connect the V-1101A BG (V/S) lead to one side of the page port dry contact closure.

__ 5. Connect the other side of the contacts to the V-1101A H (W/O) lead.

__ 6. Connect Tip of the one-way amplified speaker assemblies to PG (R/BR) of the V-1101A.

__ 7. Connect Ring of the speakers to OUT (BR/R).

__ 8. Connect the GND terminals of the speakers (black lead of horns) to the power supply Ground ("+" or "B Ground").

__ 9. Connect the –24 Vdc lead of the speakers (white lead of horns) to the power supply –24 Vdc terminal ("-" or "B Battery").

__ 10. Plug in the power supply.

__ 11. Test the system by dialing the telephone

 

system page access code or pressing the

 

page button and speaking into the handset:

__

(a) If you hear the page go to step 12.

__

(b) If you do not hear the page verify steps

 

1-10 have been performed properly and all

 

connections are good. Also verify proper

 

telephone system configuration and

 

programming. If you have programming

 

questions contact the telephone system

 

manufacturer.

__ 12.

Adjust the volume controls on the individual

 

speakers to the desired levels while paging.

__ 13.

If background music is to be provided:

__

(a) Connect the music source to the

 

V-1101A MT and MR (R/G and G/R).

__

(b) With the V-1101A idle adjust the music

 

source volume control to provide the desired

 

level at the speakers.

9

947101

Image 9
Contents Introduction SpecificationsDesign Port Access InstallationBackground Music MountingConnecting Arrangements Power ConnectionsC D E F Wiring Instructions Test the unit by connecting a linemans test Intercom Block Have been performed properly and all Technical Assistance OperationTroubleshooting Chart Valcom Limited Warranty