Motorola FLX4 manual Battery Information, ➌ í

Battery Information

Your message receiver is designed to operate with a sin- gle AA-size alkaline battery (carbon zinc batteries are not recommended). See the diagram for the battery door location.

To install or replace the battery, place the message receiver face down and proceed as follows:

➊Unlock the battery door by sliding the door latch away from the battery door.

➋Slide the battery door in the direction of the arrow (toward the outer edge).

➌Lift the battery door away from the housing to remove it. Lift the battery out of the battery compart- ment, taking note of the positive (+) and negative (-) markings on the battery and the message receiver housing.

➊

➌ í

➋

SCRIPTOR LX4/FLX4 Message Receiver

Battery Replacement (rear view)

To install a new battery, reverse this procedure, taking note of the positive (+) and negative (-) markings.

CAUTION: Do not insert the battery backwards or the messages stored or locked in memory will be erased.

16