Motorola FLX4 manual Setting the Message Alarm, To set a one-time message alarm

NOTE: To exit from any menu without making changes, press è.

Setting the Message Alarm

This feature allows you to set a one-time or a daily alarm for a particular personal message. You can set an alarm for up to five personal messages.

To set a one-time message alarm:

➊Press è.

➋Press Š or ‹ to select the message you want to alarm.

➌Press ç to display the function menu.

➍ Press ‹ to move the cursor to ….

➎ Press ç to display the set-message-alarm screen.

When the screen is first displayed, the cursor is at the far left position.

This symbol defines the alarm status -- either alarm enabled (c) or alarm disabled (Ì).

➏From the set-message-alarm screen follow the same steps described in Setting the Alarm.

To set a daily message alarm:

Follow the instructions above to set the alarm time, then follow the instructions in “To set the alarm to alert daily” under Setting the Alarm.

The bsymbol replaces the msymbol when the mes- sage alarm is set.

At the selected time, your message receiver vibrates or emits a 12-second alert, depending on the current alert mode. Press J to display the message the alarm is set for.

The msymbol replaces the bsymbol after the alarm has sounded unless the alarm is set to alert daily.

NOTE: If the alarm expires without being acknowl- edged, the … flashes until the message is read.

9