Using the Function Menu
Press ç to display the function menu.
The function menu gives you access to the many features of your message receiver through a series of symbols and prompts. For example, when the function menu screen is first displayed, the˜ symbol flashes, indicating the present position of the cursor.You can now press Š or
‹to move the cursor within the function menu.
NOTE: To exit from any menu without making changes, press è.
Backlighting
The message receiver’s backlight illuminates in low- light conditions when any button is pressed. You can manually activate or deactivate the backlight at any time by pressing and holding ç for two seconds. If no other buttons are pressed, the backlight automatically turns off when the message receiver returns to the standby mode.
Locking and Unlocking Messages
Up to 10 messages can be locked in memory, preventing them from being replaced when memory is full (indicated by the Ž symbol).
➊Press è.
➋Press Š or ‹ to select the message to lock.
➌ Press ç to display the function menu.
➍Press ‹ to move the cursor to lock (’) or unlock (“).
➎Press ç to lock or unlock the message.
➏The symbol ’ or “ is displayed, indicating the status of the message in memory.
6