Polycom SIP 2.2.0 manual Dial Plan dialplan, Dialplan.applyToCallListDial

Administrator’s Guide SoundPoint IP / SoundStation IP

Dial Plan <dialplan/>

Note	The dial plan is not applied against Placed Call List, VoiceMail, last call return, and
	remote control dialed numbers.

This configuration attribute is defined as follows:

Attribute	Permitted	Default	Interpretation
	Values
dialplan.applyToCallListDial	0, 1	0	This attribute covers dialing from Received
			Call List and Missed Call List including dialing
			from Edit or Info sub- menus.
			If set to 0, the dial plan is not applied against
			the dialed number.
			if set to 1, the dial plan is applied against the
			dialed number.
dialplan.applyToDirectoryDial	0, 1	0	This attribute covers dialing from Directory as
			well as Speed Dial List.
			Value interpretation is the same as for
			dialplan.applyToCallListDial.
			Note: An Auto Call Contact number is
			considered a dial from directory.
dialplan.applyToUserDial	0, 1	1	This attribute covers the case when the user
			presses the Dial soft key to send dialed
			number when in idle state display.
			Value interpretation is the same as for
			dialplan.applyToCallListDial.
dialplan.applyToUserSend	0, 1	1	This attribute covers the case when the user
			presses the Send soft key to send the dialed
			number.
			Value interpretation is the same as for
			dialplan.applyToCallListDial.
dialplan.impossibleMatchHandling	0, 1 or 2	0	If set to 0, the digits entered up to and
			including the point where an impossible
			match occurred are sent to the server
			immediately.
			If set to 1, give reorder tone.
			If set to 2, allow user to accumulate digits and
			dispatch call manually with the Send soft key.
dialplan.removeEndOfDial	0, 1	1	If set to 1, strip trailing # digit from digits sent
			out.

A - 16