Telex SS-1002 manual Operation, Channel Select SS-2002 & SS-2002RM Only, Receiving Calls

Page 15

Operation

Channel Select (SS-2002 & SS-2002RM Only)

Tap the Ch Select key to select channel 1 or 2. The key is green when channel 1 is selected and red when channel two is selected.

Headset/Headphone/Speaker/Microphone Selection

•To use a headset or telephone style handset, set the Speaker and Panel Mic keys to off.

•To use headphones with the built-in panel microphone, set the Speaker key to off, set the Panel Mic Key to on, and make sure that a gooseneck microphone is not inserted in the panel microphone connector.

•To use headphones with a gooseneck microphone, set the Speaker key to off, set the Panel Mic Key to on, and make sure that a gooseneck microphone is inserted in the panel microphone connector.

•To use the speaker with a handheld dynamic microphone, set the speaker key to on and set the Panel Mic Key to off.

•To use the speaker with the built-in panel microphone, set the Speaker and Panel Mic keys to on, and make sure that a gooseneck microphone is not inserted in the panel microphone connector.

•To use the speaker with a gooseneck microphone, set the Speaker and Panel Mic keys to on, and make sure that a goose- neck microphone is inserted in the panel microphone connector.

Receiving Calls

When there is an incoming call signal, the Call key will flash red. There will also be a beep tone in the headphones or speaker if the beep feature is activated.

NOTE: The incoming call indication is provided only for the currently selected intercom channel in the case of SS-2002 & SS-2002RM models.

Turn on the Talk and Listen keys and begin your conversation. Turn the keys off when finished.

NOTE: You can turn the talk and listen keys on in either momentary or latched mode. For momentary operation, press and hold the key. For latched operation, tap the key to turn it on. Then tap it again to turn it off when finished.

Calling an Intercom Channel

1.SS-2002 & SS-2002RM only: select the desired intercom channel.

2.Press and hold the Call key. An inaudible call signal will be sent, and the Listen key will automatically turn on.

3.When you hear a response, release the call key and activate the talk key.

4.Turn off your Talk and Listen keys to end the conversation.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents User Instructions FCC Statement Table of Contents Features IntroductionDescription SS-1002 / SS-2002 features Unpacking InstallationConfiguration Pre-check DIP SwitchesIncoming Call Beep Call Signal CompatibilityBalanced/Unbalanced Switch Mic Kill ReceiveIntercom Channel Connections Headset Connector NotesPanel Mic Connector Notes Description of Phantom Powered ConnectionDescription of Locally Powered Connection All Locally Powered Intercom Stations Dry Lines Page Page Audiocom cable wiring diagrams Sidetone Adjustment Power-UpReceiving Calls OperationChannel Select SS-2002 & SS-2002RM Only Headset/Headphone/Speaker/Microphone SelectionDynamic-mic Headset/Handset SpecificationsIntercom Channels, Balanced mode SW1 set to BAL position GeneralSpeaker Output Power DimensionsTrademarks
Related manuals
Manual 26 pages 63.84 Kb

SS-2002, SS-2002RM, SS-1002 specifications

The Telex SS-1002 is a highly regarded wireless intercom system designed primarily for broadcast, film, and live production environments. Known for its reliable performance and user-friendly features, the SS-1002 has become a staple in professional communication setups.

One of the standout features of the Telex SS-1002 is its advanced wireless technology. The system operates in the 2.4 GHz ISM frequency band, which provides robust transmission capabilities while minimizing interference from other wireless devices. The range of the SS-1002 can extend up to 300 feet, allowing users to communicate seamlessly across large production areas.

The SS-1002 is also characterized by its high-quality audio clarity. Utilizing digital transmission techniques, it delivers clear, distortion-free communication, which is crucial for effective coordination during live events. The unit is equipped with a full-duplex communication system, allowing for simultaneous speaking and listening, which enhances the collaborative workflow among team members.

Another notable aspect of the Telex SS-1002 is its ease of use. The system features intuitive controls and a straightforward interface, making it accessible for both technical and non-technical users. Users can quickly adjust volume levels, switch channels, and monitor battery life through the device’s LED indicators.

Power efficiency is yet another characteristic of the SS-1002. It runs on rechargeable lithium-ion batteries, providing up to 10 hours of continuous use on a single charge. This long battery life reduces downtime and ensures that production crews can maintain constant communication throughout demanding schedules.

Moreover, the Telex SS-1002 supports multiple belt packs, enabling a scalable communication network tailored to the needs of the production team. Each belt pack can be configured to operate on different channels, facilitating private communication among specific groups without causing interference with others.

In conclusion, the Telex SS-1002 stands out in the realm of wireless intercom systems due to its advanced technology, high audio fidelity, user-friendly design, and efficient power management. Its versatility and reliability make it an essential tool for professionals in the broadcasting and live production industries, where effective communication is key to success.
Top Page Image Contents