Telex SS-2002, SS-1002 Specifications, General, Dynamic-mic Headset/Handset, Panel Microphone

Page 16

Specifications

General

Power Requirements:

Phantom Power: +24 VDC nominal, 175 mA

Local Power: +12 to +15 VDC, 250 mA

Dimensions: See dimension drawings.

Environmental Requirements:

Storage: -20°C to 80°C; 0% to 95% RH, non-condensing

Operating: -15°C to 60°C; 0% to 95% RH, non-condensing

Dynamic-mic Headset/Handset

Microphone: 50 to 200 ohms, dynamic (balanced or unbalanced)

Headphones: 150 to 600 ohms, monaural

Connector Type: XLR-4M

Pin 1 - Microphone Low

Pin 2 - Microhpne High

Pin 3 - Headphone High

Pin 4 - Headphone Low

Panel Microphone

Built-in Microphone:

2.2k ohms, electret (-44 dB nominal), Omnidirectional

Gooseneck Microphone:

Connector Type: ¼” Threaded TRS 5k ohms, electret (-47 dB nominal)

Tip - Microphone High (+12 VDC bias) Ring - Common

Sleeve - Common

Compatible with MCP-90 Series Microphones

Intercom Channels, Balanced mode (SW1 set to BAL position)

Output Level: 1Vrms nominal

Input Impedance: 300 ohms

Bridging Impedance: greater than 10k ohms

Sidetone: -40 dB, 35 dB adjustable range

Call Signaling:

Send: 20 kHz ±100 Hz, 0.5 Vrms ±10%

Receive: 20 kHz ±800 Hz, 100 mVrms

Mic-Kill Detect Frequency: 24 kHz ±800 Hz, 100mVrms

Noise Contribution: less than -70 dB

Common Mode Rejection Ratio: greater than 50 dB

Connector Type: Six-position push type terminal block

Pin 1 - Audio and DC Common

Pin 2 - Local power (+12 to +15 VDC) If needed

Pin 3 - Intercom channel 1 audio low and +24 VDC power

Pin 4 - Intercom channel 1 audio high and +24 VDC power

Pin 5 - Intercom channel 2 audio low and +24 VDC power

Pin 6 - Intercom channel 2 audio high and +24VDC power

Intercom Channels, Unbalanced mode (SW1 set to UNBAL position)

Output Level: 0.70 Vrms ±10%

Input Impedance: 200 ohms

Bridging Impedance: greater than 10k ohms

Sidetone: -40 dB, 35 dB adjustable range

16

Image 16
Contents User Instructions FCC Statement Table of Contents Introduction FeaturesDescription SS-1002 / SS-2002 features Installation Configuration Pre-checkDIP Switches UnpackingCall Signal Compatibility Balanced/Unbalanced SwitchMic Kill Receive Incoming Call BeepHeadset Connector Notes Panel Mic Connector NotesDescription of Phantom Powered Connection Intercom Channel ConnectionsDescription of Locally Powered Connection All Locally Powered Intercom Stations Dry Lines Page Page Audiocom cable wiring diagrams Power-Up Sidetone AdjustmentOperation Channel Select SS-2002 & SS-2002RM OnlyHeadset/Headphone/Speaker/Microphone Selection Receiving CallsSpecifications Intercom Channels, Balanced mode SW1 set to BAL positionGeneral Dynamic-mic Headset/HandsetDimensions Speaker Output PowerTrademarks
Related manuals
Manual 26 pages 63.84 Kb

SS-2002, SS-2002RM, SS-1002 specifications

The Telex SS-1002 is a highly regarded wireless intercom system designed primarily for broadcast, film, and live production environments. Known for its reliable performance and user-friendly features, the SS-1002 has become a staple in professional communication setups.

One of the standout features of the Telex SS-1002 is its advanced wireless technology. The system operates in the 2.4 GHz ISM frequency band, which provides robust transmission capabilities while minimizing interference from other wireless devices. The range of the SS-1002 can extend up to 300 feet, allowing users to communicate seamlessly across large production areas.

The SS-1002 is also characterized by its high-quality audio clarity. Utilizing digital transmission techniques, it delivers clear, distortion-free communication, which is crucial for effective coordination during live events. The unit is equipped with a full-duplex communication system, allowing for simultaneous speaking and listening, which enhances the collaborative workflow among team members.

Another notable aspect of the Telex SS-1002 is its ease of use. The system features intuitive controls and a straightforward interface, making it accessible for both technical and non-technical users. Users can quickly adjust volume levels, switch channels, and monitor battery life through the device’s LED indicators.

Power efficiency is yet another characteristic of the SS-1002. It runs on rechargeable lithium-ion batteries, providing up to 10 hours of continuous use on a single charge. This long battery life reduces downtime and ensures that production crews can maintain constant communication throughout demanding schedules.

Moreover, the Telex SS-1002 supports multiple belt packs, enabling a scalable communication network tailored to the needs of the production team. Each belt pack can be configured to operate on different channels, facilitating private communication among specific groups without causing interference with others.

In conclusion, the Telex SS-1002 stands out in the realm of wireless intercom systems due to its advanced technology, high audio fidelity, user-friendly design, and efficient power management. Its versatility and reliability make it an essential tool for professionals in the broadcasting and live production industries, where effective communication is key to success.